XC17S40XLPD8C

Product Overview

Category

XC17S40XLPD8C belongs to the category of programmable logic devices (PLDs).

Use

It is primarily used for digital circuit design and implementation.

Characteristics

• Programmable: The XC17S40XLPD8C can be programmed to perform specific functions.
• High-speed operation: It operates at a high clock frequency, allowing for efficient processing of digital signals.
• Low power consumption: The device is designed to consume minimal power during operation.
• Compact package: The XC17S40XLPD8C comes in a small form factor, making it suitable for space-constrained applications.
• Versatile: It can be used in a wide range of digital circuit applications.

Package and Quantity

The XC17S40XLPD8C is available in a DIP-8 package. Each package contains one unit of the device.

Specifications

• Maximum operating frequency: 100 MHz
• Number of inputs: 40
• Number of outputs: 40
• Operating voltage: 3.3V
• Programming technology: EEPROM-based

Pin Configuration

The XC17S40XLPD8C has a total of 8 pins. The pin configuration is as follows:

Pin 1: Input 1 Pin 2: Input 2 Pin 3: Input 3 Pin 4: Output 1 Pin 5: Output 2 Pin 6: Output 3 Pin 7: VCC (Power supply) Pin 8: GND (Ground)

Functional Features

• Logic implementation: The XC17S40XLPD8C can be programmed to implement various logical functions such as AND, OR, NOT, etc.
• Flexible input/output configuration: The device allows for customization of input and output configurations to suit specific application requirements.
• In-system programmability: It can be programmed while in operation, allowing for on-the-fly changes to the logic design.

Advantages

• Versatility: The XC17S40XLPD8C can be used in a wide range of digital circuit applications, providing flexibility to designers.
• High-speed operation: Its ability to operate at high clock frequencies enables efficient processing of digital signals.
• Low power consumption: The device is designed to minimize power consumption, making it suitable for battery-powered applications.

Disadvantages

• Limited capacity: The XC17S40XLPD8C has a relatively small number of inputs and outputs compared to higher-end PLDs.
• Non-volatile programming: Once programmed, the device retains its configuration even after power is removed. However, this also means that changes to the logic design require reprogramming.

Working Principles

The XC17S40XLPD8C utilizes EEPROM-based technology to store and implement the programmed logic functions. When powered on, the device reads the stored configuration from its memory and performs the specified logical operations based on the input signals.

Application Field Plans

The XC17S40XLPD8C can be used in various applications, including: 1. Digital signal processing 2. Communication systems 3. Industrial automation 4. Consumer electronics

Alternative Models

1. XC17S30XLPD8C: Similar to XC17S40XLPD8C but with a lower number of inputs and outputs.
2. XC17S60XLPD8C: Similar to XC17S40XLPD8C but with a higher number of inputs and outputs.
3. XC17S80XLPD8C: Similar to XC17S40XLPD8C but with an increased capacity for more complex logic designs.

These alternative models provide options with varying capabilities to suit different project requirements.

In conclusion, the XC17S40XLPD8C is a versatile programmable logic device that offers high-speed operation and low power consumption. Its compact package and flexible input/output configuration make it suitable for various digital circuit applications. However, its limited capacity and non-volatile programming nature should be considered when choosing this device.