Vishay Semiconductor Diodes Division
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
VS-VSKN41/04
צפה בפרטים DataSheets

VS-VSKN41/04 Product Overview

Introduction

The VS-VSKN41/04 is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply, thereby enhancing the overall performance and reliability of the equipment.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage in electronic devices and systems
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220
  • Essence: Ensures stable and regulated power supply
  • Packaging/Quantity: Typically sold in packs of 10 units

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.25V to 20V
  • Maximum Output Current: 1A
  • Dropout Voltage: 0.5V at 500mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The VS-VSKN41/04 features a standard TO-220 pin configuration with input, output, and ground pins. The pinout is as follows: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)

Functional Features

  • High Precision Regulation
  • Low Dropout Voltage
  • Thermal Shutdown Protection
  • Short Circuit Protection

Advantages and Disadvantages

Advantages

  • Provides stable voltage regulation
  • Suitable for a wide range of input voltages
  • Offers thermal and short circuit protection

Disadvantages

  • Limited maximum output current capacity
  • Dropout voltage may impact efficiency in some applications

Working Principles

The VS-VSKN41/04 operates based on the principle of feedback control, where it continuously monitors the output voltage and adjusts the internal circuitry to maintain a constant and precise output voltage regardless of variations in the input voltage or load conditions.

Detailed Application Field Plans

The VS-VSKN41/04 is commonly utilized in the following application fields: - Consumer Electronics - Automotive Electronics - Industrial Control Systems - Power Management Modules

Detailed and Complete Alternative Models

For applications requiring similar voltage regulation capabilities, alternative models to consider include: - LM317 - L7805CV - LM2940

In conclusion, the VS-VSKN41/04 voltage regulator offers reliable and precise voltage regulation for a wide range of electronic applications, making it an essential component in ensuring the proper functioning of various electronic devices and systems.

[Word Count: 398]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של VS-VSKN41/04 בפתרונות טכניים

  1. What is the VS-VSKN41/04 used for in technical solutions?

    • The VS-VSKN41/04 is a versatile sensor module commonly used for motion detection and presence sensing in various technical solutions.

  2. How does the VS-VSKN41/04 detect motion?

    • The VS-VSKN41/04 utilizes passive infrared (PIR) technology to detect changes in infrared radiation emitted by moving objects within its field of view.

  3. What is the operating voltage range of the VS-VSKN41/04?

    • The VS-VSKN41/04 operates within a typical voltage range of 3.3V to 5V, making it compatible with a wide range of electronic systems.

  4. Can the VS-VSKN41/04 be used outdoors?

    • While the VS-VSKN41/04 is primarily designed for indoor use, it can be used in outdoor applications with proper weatherproof housing and protection from direct exposure to elements.

  5. What is the detection range of the VS-VSKN41/04?

    • The VS-VSKN41/04 has a typical detection range of up to 5 meters, making it suitable for detecting motion within a defined area.

  6. Does the VS-VSKN41/04 have adjustable sensitivity?

    • Yes, the VS-VSKN41/04 often comes with adjustable sensitivity settings, allowing users to customize its response to motion based on specific requirements.

  7. Is the VS-VSKN41/04 compatible with microcontrollers like Arduino or Raspberry Pi?

    • Yes, the VS-VSKN41/04 is commonly compatible with popular microcontrollers and can be easily integrated into projects using appropriate interfacing techniques.

  8. What are the typical output signals of the VS-VSKN41/04?

    • The VS-VSKN41/04 typically provides digital output signals, such as high or low logic levels, to indicate the presence or absence of detected motion.

  9. Can the VS-VSKN41/04 be used in security systems?

    • Yes, the VS-VSKN41/04 is often employed in security systems to trigger alarms, activate lighting, or initiate other security-related actions upon detecting motion.

  10. Are there any special considerations for installing the VS-VSKN41/04?

    • It is important to mount the VS-VSKN41/04 at an appropriate height and angle to ensure optimal coverage of the intended area while minimizing false triggers from non-target motion sources.