VLZ18-GS08
Product Overview
Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy
Package: SOT-223
Essence: Regulates voltage with minimal dropout
Packaging/Quantity: Tape & Reel, 2500 units
Specifications
- Input Voltage Range: 2.5V to 18V
- Output Voltage Range: 1.2V to 16V
- Dropout Voltage: 300mV at 500mA
- Output Current: 500mA
- Line Regulation: 0.3%
- Load Regulation: 0.4%
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
- NC (No Connection)
Functional Features
- Low dropout voltage
- High accuracy over line and load variations
- Thermal shutdown protection
- Short-circuit current limit
- Reverse battery protection
Advantages
- Wide input voltage range
- Low dropout voltage
- Excellent line and load regulation
- Compact SOT-223 package
Disadvantages
- Limited output current compared to some alternatives
- Higher quiescent current than some low-power regulators
Working Principles
The VLZ18-GS08 is a linear voltage regulator that maintains a stable output voltage by adjusting the resistance between the input and output pins. It uses a reference voltage to compare the output voltage and makes necessary adjustments to ensure a consistent output.
Detailed Application Field Plans
The VLZ18-GS08 is suitable for various applications requiring a stable and accurate voltage supply, such as: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems
Detailed and Complete Alternative Models
- LM1117-3.3
- LT1763
- MCP1700
In conclusion, the VLZ18-GS08 is a versatile voltage regulator with excellent performance characteristics, making it suitable for a wide range of applications. Its compact package and high accuracy make it a popular choice for designers seeking reliable voltage regulation in their electronic systems.
Word count: 324
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של VLZ18-GS08 בפתרונות טכניים
What is the VLZ18-GS08?
- The VLZ18-GS08 is a voltage level shifter designed to convert signals between different voltage domains in technical solutions.
What voltage levels can the VLZ18-GS08 support?
- The VLZ18-GS08 supports voltage level shifting between 1.2V and 3.6V, making it suitable for a wide range of applications.
What are the typical applications of the VLZ18-GS08?
- The VLZ18-GS08 is commonly used in applications such as data communication interfaces, industrial control systems, and consumer electronics where voltage level translation is required.
Does the VLZ18-GS08 require external components for operation?
- No, the VLZ18-GS08 is a standalone voltage level shifter and does not require external components for basic operation.
What is the maximum data rate supported by the VLZ18-GS08?
- The VLZ18-GS08 can support data rates up to 100 Mbps, making it suitable for high-speed signal conversion in various technical solutions.
Is the VLZ18-GS08 compatible with I2C and SPI interfaces?
- Yes, the VLZ18-GS08 is compatible with popular serial communication interfaces such as I2C and SPI, making it versatile for interfacing with different devices.
Can the VLZ18-GS08 handle bidirectional voltage level shifting?
- Yes, the VLZ18-GS08 supports bidirectional voltage level shifting, allowing for seamless translation of signals in both directions.
What is the power consumption of the VLZ18-GS08?
- The VLZ18-GS08 has low power consumption, making it suitable for battery-powered and energy-efficient applications.
Does the VLZ18-GS08 have built-in ESD protection?
- Yes, the VLZ18-GS08 features built-in ESD protection, enhancing the reliability and robustness of the voltage level shifting process.
Are there any specific layout considerations when using the VLZ18-GS08 in a design?
- It is recommended to follow the layout guidelines provided in the datasheet to ensure optimal performance and signal integrity when integrating the VLZ18-GS08 into a technical solution.