Vishay Semiconductor Diodes Division
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
SS1H10-M3/5AT
צפה בפרטים DataSheets

SS1H10-M3/5AT

Introduction

The SS1H10-M3/5AT is a semiconductor product belonging to the category of Schottky Rectifier. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Schottky Rectifier
  • Use: The SS1H10-M3/5AT is commonly used in power supply applications, voltage clamping, and reverse polarity protection.
  • Characteristics: It is known for its low forward voltage drop, high switching speed, and low leakage current.
  • Package: The SS1H10-M3/5AT is typically available in a surface mount SMB package.
  • Essence: Its essence lies in providing efficient rectification and voltage regulation in electronic circuits.
  • Packaging/Quantity: It is usually packaged in reels or tubes, with varying quantities based on manufacturer specifications.

Specifications

  • Forward Voltage Drop: Typically around 0.55V at 1A
  • Reverse Voltage: 100V
  • Average Rectified Current: 1A
  • Operating Temperature Range: -65°C to +125°C
  • Storage Temperature Range: -65°C to +150°C

Detailed Pin Configuration

The SS1H10-M3/5AT typically has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Low forward voltage drop
  • High switching speed
  • Low reverse leakage current
  • High temperature operation capability

Advantages and Disadvantages

Advantages

  • Efficient power conversion
  • Fast switching characteristics
  • Low power dissipation
  • Compact size

Disadvantages

  • Higher cost compared to standard diodes
  • Sensitivity to voltage spikes

Working Principles

The SS1H10-M3/5AT operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to standard PN-junction diodes.

Detailed Application Field Plans

The SS1H10-M3/5AT finds extensive use in the following applications: - Power supply units - Voltage clamping circuits - Reverse polarity protection circuits - DC-DC converters - Solar panel bypass diodes

Detailed and Complete Alternative Models

Some alternative models to the SS1H10-M3/5AT include: - SS14 - SS34 - SS54 - SS110

In conclusion, the SS1H10-M3/5AT Schottky Rectifier offers efficient rectification and voltage regulation in various electronic circuits, making it a crucial component in modern electronics.

Word Count: 372

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של SS1H10-M3/5AT בפתרונות טכניים

  1. What is the SS1H10-M3/5AT?

    • The SS1H10-M3/5AT is a high-speed, low-loss Schottky diode designed for use in various technical solutions.

  2. What are the key features of the SS1H10-M3/5AT?

    • The key features include high-speed switching, low forward voltage drop, and low reverse leakage current.

  3. In what technical applications can the SS1H10-M3/5AT be used?

    • It is commonly used in power supply circuits, voltage clamping, and reverse polarity protection in various electronic devices.

  4. What is the maximum forward voltage of the SS1H10-M3/5AT?

    • The maximum forward voltage is typically around 0.55V at a forward current of 1A.

  5. What is the maximum reverse voltage of the SS1H10-M3/5AT?

    • The maximum reverse voltage is typically around 100V.

  6. What is the typical junction capacitance of the SS1H10-M3/5AT?

    • The typical junction capacitance is around 150pF at a reverse bias of 1V.

  7. Can the SS1H10-M3/5AT handle high-frequency applications?

    • Yes, it is designed to handle high-frequency applications with its high-speed switching capability.

  8. Is the SS1H10-M3/5AT suitable for automotive applications?

    • Yes, it is suitable for automotive applications due to its robust construction and reliability.

  9. What is the operating temperature range of the SS1H10-M3/5AT?

    • The operating temperature range is typically from -65°C to 125°C, making it suitable for a wide range of environments.

  10. Are there any recommended mounting techniques for the SS1H10-M3/5AT?

    • It is recommended to use proper heat sinking and soldering techniques to ensure optimal performance and reliability.