Vishay Semiconductor Diodes Division
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
DZ23C51-G3-18
צפה בפרטים DataSheets

DZ23C51-G3-18

Introduction

The DZ23C51-G3-18 is a diode belonging to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor Diode
  • Use: Rectification, voltage regulation, signal demodulation
  • Characteristics: Small form factor, low forward voltage drop, high switching speed
  • Package: SOD-323
  • Essence: Silicon diode
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Forward Voltage: 0.715V @ 10mA
  • Reverse Voltage: 18V
  • Maximum Continuous Forward Current: 225mA
  • Reverse Recovery Time: 4ns
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The DZ23C51-G3-18 has three pins: 1. Anode (A) 2. Cathode (K) 3. Not connected (NC)

Functional Features

  • Fast switching speed
  • Low forward voltage drop
  • High current capability
  • Small package size

Advantages and Disadvantages

Advantages

  • Small form factor
  • Low forward voltage drop
  • Fast switching speed

Disadvantages

  • Limited reverse voltage tolerance
  • Sensitive to overvoltage conditions

Working Principles

The DZ23C51-G3-18 operates based on the principle of semiconductor junction behavior. When forward biased, it allows current flow with minimal voltage drop. In reverse bias, it blocks the current flow up to its breakdown voltage.

Detailed Application Field Plans

The DZ23C51-G3-18 finds applications in various fields including: - Power supply circuits - Signal demodulation circuits - Voltage clamping circuits - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the DZ23C51-G3-18 include: - 1N4148 - BAV99 - BAT54S

In conclusion, the DZ23C51-G3-18 is a versatile semiconductor diode with fast switching characteristics, making it suitable for a wide range of applications.

[Word count: 298]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של DZ23C51-G3-18 בפתרונות טכניים

  1. What is the maximum reverse voltage of DZ23C51-G3-18?

    • The maximum reverse voltage of DZ23C51-G3-18 is 51V.

  2. What is the forward voltage drop of DZ23C51-G3-18?

    • The forward voltage drop of DZ23C51-G3-18 is typically around 0.9V at a forward current of 10mA.

  3. What is the power dissipation of DZ23C51-G3-18?

    • The power dissipation of DZ23C51-G3-18 is approximately 225mW.

  4. What is the maximum junction temperature of DZ23C51-G3-18?

    • The maximum junction temperature of DZ23C51-G3-18 is 150°C.

  5. What are the typical applications for DZ23C51-G3-18?

    • DZ23C51-G3-18 is commonly used in voltage regulation, signal clamping, and transient voltage suppression applications.

  6. What is the package type of DZ23C51-G3-18?

    • DZ23C51-G3-18 is available in a SOD-323 package.

  7. What is the reverse leakage current of DZ23C51-G3-18 at its maximum rated voltage?

    • The reverse leakage current of DZ23C51-G3-18 at its maximum rated voltage is typically less than 5µA.

  8. Can DZ23C51-G3-18 be used in high-frequency applications?

    • Yes, DZ23C51-G3-18 is suitable for high-frequency applications due to its fast response time and low capacitance.

  9. What are the storage and operating temperature ranges for DZ23C51-G3-18?

    • The storage temperature range is -55°C to 150°C, and the operating temperature range is -55°C to 125°C.

  10. Is DZ23C51-G3-18 RoHS compliant?

    • Yes, DZ23C51-G3-18 is RoHS compliant, making it suitable for use in environmentally friendly electronic products.