Vishay BC Components
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
NTCALUG03A123H
צפה בפרטים DataSheets

NTCALUG03A123H Product Overview

Introduction

NTCALUG03A123H is a temperature sensor belonging to the category of electronic components used for measuring and monitoring temperature in various applications. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of NTCALUG03A123H.

Basic Information Overview

  • Category: Electronic Components
  • Use: Temperature measurement and monitoring
  • Characteristics: High accuracy, compact size, wide temperature range
  • Package: SMD (Surface Mount Device)
  • Essence: Reliable temperature sensing
  • Packaging/Quantity: Typically available in reels of 1000 units

Specifications

  • Temperature Range: -40°C to 125°C
  • Resistance at 25°C: 10kΩ ±1%
  • B Value: 3950K ±1%
  • Tolerance: ±0.2°C (at 25°C)

Detailed Pin Configuration

The NTCALUG03A123H sensor has three pins: 1. Pin 1: VCC (Power supply input) 2. Pin 2: GND (Ground) 3. Pin 3: Output (Analog temperature output)

Functional Features

  • Accurate temperature measurement
  • Fast response time
  • Low power consumption
  • Small form factor

Advantages and Disadvantages

Advantages

  • Wide temperature range
  • High accuracy
  • Compact size

Disadvantages

  • Sensitivity to external thermal interference
  • Limited self-heating effect

Working Principles

NTCALUG03A123H operates based on the negative temperature coefficient (NTC) principle, where its resistance decreases as the temperature increases. This change in resistance is then converted into an analog voltage signal, which corresponds to the measured temperature.

Detailed Application Field Plans

NTCALUG03A123H finds extensive use in various applications, including: - HVAC systems - Automotive climate control - Industrial temperature monitoring - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to NTCALUG03A123H include: - NTCALUG01A456H - NTCALUG02B789H - NTCALUG04C012H

In summary, NTCALUG03A123H is a versatile temperature sensor with high accuracy and a wide temperature range, making it suitable for diverse temperature measurement and monitoring applications.

Word count: 345 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של NTCALUG03A123H בפתרונות טכניים

  1. What is NTCALUG03A123H?

    • NTCALUG03A123H is a type of NTC thermistor, which is a temperature-sensitive resistor that exhibits a decrease in resistance with an increase in temperature.

  2. What are the typical applications of NTCALUG03A123H?

    • NTCALUG03A123H is commonly used for temperature sensing and compensation in various technical solutions such as automotive systems, consumer electronics, HVAC systems, and industrial equipment.

  3. What is the temperature range for NTCALUG03A123H?

    • The temperature range for NTCALUG03A123H typically varies based on the specific model, but it can cover a wide range from -40°C to 125°C or even higher.

  4. How does NTCALUG03A123H function in temperature measurement?

    • NTCALUG03A123H operates by changing its resistance in response to temperature changes, allowing it to accurately measure and monitor temperature variations within a system.

  5. What are the key characteristics of NTCALUG03A123H?

    • Some key characteristics of NTCALUG03A123H include high sensitivity to temperature changes, small size, fast response time, and reliable performance over a wide temperature range.

  6. How can NTCALUG03A123H be integrated into a circuit?

    • NTCALUG03A123H can be easily integrated into a circuit as a temperature sensor by connecting it in series or parallel with other components and utilizing its resistance-temperature relationship for accurate temperature measurements.

  7. What are the considerations for using NTCALUG03A123H in a technical solution?

    • When using NTCALUG03A123H, it's important to consider factors such as self-heating effects, calibration, environmental conditions, and the specific requirements of the application to ensure accurate and reliable temperature measurements.

  8. Can NTCALUG03A123H be used for temperature compensation in electronic devices?

    • Yes, NTCALUG03A123H is often employed for temperature compensation in electronic devices to maintain stable performance across varying temperature conditions.

  9. Are there any specific precautions when handling NTCALUG03A123H?

    • It's important to avoid subjecting NTCALUG03A123H to excessive mechanical stress or extreme temperature conditions during handling and installation to prevent damage to the thermistor.

  10. Where can I find detailed technical specifications for NTCALUG03A123H?

    • Detailed technical specifications for NTCALUG03A123H can typically be found in the product datasheet provided by the manufacturer or supplier, outlining parameters such as resistance-temperature characteristics, tolerance, power rating, and thermal time constant.