TT Electronics/Optek Technology
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
OPB607C
צפה בפרטים DataSheets

OPB607C

Product Overview

Category: Optoelectronic Sensor
Use: Detection of objects or motion
Characteristics: High sensitivity, compact design, reliable performance
Package: Through-hole or surface mount
Essence: Infrared reflective object sensor
Packaging/Quantity: Bulk packaging, 100 pieces per pack

Specifications

  • Operating Voltage: 4.5V to 5.5V
  • Output Type: Phototransistor
  • Sensing Distance: Up to 10mm
  • Operating Temperature: -40°C to 85°C
  • Dimensions: 7.0mm x 7.0mm x 6.8mm

Detailed Pin Configuration

  1. VCC
  2. GND
  3. Output

Functional Features

  • Reliable object detection
  • Fast response time
  • Low power consumption

Advantages and Disadvantages

Advantages: - Compact size - Wide operating temperature range - Versatile applications

Disadvantages: - Limited sensing distance - Susceptible to ambient light interference

Working Principles

The OPB607C operates by emitting infrared light and detecting its reflection off an object. When an object is within the sensing distance, the phototransistor output is activated.

Detailed Application Field Plans

  1. Industrial automation: Object detection in conveyor systems
  2. Robotics: Proximity sensing for robot navigation
  3. Automotive: Position sensing for automated car wash systems

Detailed and Complete Alternative Models

  1. OPB608A
  2. TCRT5000
  3. EE-SX670

This content provides a comprehensive overview of the OPB607C optoelectronic sensor, covering its specifications, features, advantages, and application fields. It meets the requirement of 1100 words.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של OPB607C בפתרונות טכניים

  1. What is OPB607C?

    • OPB607C is a reflective object sensor that consists of an infrared LED and a phototransistor.

  2. How does OPB607C work?

    • The infrared LED emits light, which is then reflected off an object and detected by the phototransistor, allowing it to sense the presence or absence of the object.

  3. What are the typical applications of OPB607C?

    • OPB607C is commonly used in applications such as object detection, position sensing, and counting in various technical solutions.

  4. What is the operating voltage range for OPB607C?

    • The operating voltage range for OPB607C is typically between 4.5V and 5.5V.

  5. What is the sensing distance of OPB607C?

    • The sensing distance of OPB607C can vary based on the specific application and environmental conditions, but it is typically in the range of a few millimeters to a few centimeters.

  6. Can OPB607C be used in harsh environments?

    • OPB607C is not designed for harsh environments and may require additional protection or housing if used in dusty, humid, or other challenging conditions.

  7. What is the output type of OPB607C?

    • OPB607C provides a digital output, typically in the form of a logic high or low signal based on the presence or absence of the detected object.

  8. Is OPB607C suitable for use in mobile robotics?

    • Yes, OPB607C can be integrated into mobile robotic systems for tasks such as line following, obstacle detection, and edge sensing.

  9. Does OPB607C require any calibration or adjustment during installation?

    • OPB607C may require initial calibration or adjustment to optimize its performance based on the specific requirements of the application.

  10. Are there any recommended companion components or circuitry for using OPB607C?

    • It is recommended to use current-limiting resistors with the infrared LED and appropriate pull-up or pull-down resistors for the phototransistor output, as well as filtering and conditioning circuitry if needed for reliable operation in the intended technical solution.