Toshiba Semiconductor and Storage
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
TB67H410FTG,EL
צפה בפרטים DataSheets

TB67H410FTG,EL

Product Overview

  • Category: Motor Driver IC
  • Use: This product is used to control the movement and rotation of motors in various electronic devices.
  • Characteristics:
    • High voltage and current capacity
    • Low power consumption
    • Compact package size
    • Built-in protection features
  • Package: The TB67H410FTG,EL comes in a small surface-mount package.
  • Essence: This motor driver IC provides efficient and reliable motor control for a wide range of applications.
  • Packaging/Quantity: The TB67H410FTG,EL is typically packaged in reels and available in large quantities.

Specifications

  • Operating Voltage Range: 10V to 44V
  • Output Current: Up to 4A per channel
  • Number of Channels: Dual-channel (can drive two motors independently)
  • Control Interface: Parallel input or PWM input
  • Protection Features:
    • Overcurrent protection
    • Thermal shutdown protection
    • Undervoltage lockout protection

Pin Configuration

The TB67H410FTG,EL has the following pin configuration:

  1. VCC1: Power supply for logic circuitry
  2. IN1: Input signal for motor 1
  3. OUT1: Output for motor 1
  4. GND: Ground reference
  5. VCC2: Power supply for motor driver
  6. IN2: Input signal for motor 2
  7. OUT2: Output for motor 2
  8. FAULT: Fault detection output
  9. EN: Enable input
  10. STBY: Standby input

Functional Features

  • Dual-channel motor control
  • High-speed switching capability
  • Adjustable motor current limit
  • Built-in fault detection and protection
  • Support for both parallel and PWM control modes
  • Low power consumption in standby mode

Advantages and Disadvantages

Advantages: - High voltage and current capacity - Compact package size - Built-in protection features ensure safe operation - Versatile control interface options - Efficient motor control with adjustable current limit

Disadvantages: - Limited to dual-channel motor control - Requires external components for full functionality

Working Principles

The TB67H410FTG,EL operates by receiving control signals from a microcontroller or other control circuitry. It amplifies these signals and drives the connected motors accordingly. The built-in protection features ensure safe operation by monitoring the motor current, temperature, and supply voltage.

Application Field Plans

The TB67H410FTG,EL is suitable for various applications that require precise motor control, such as:

  1. Robotics: Controlling the movement of robotic arms, legs, or wheels.
  2. CNC Machines: Driving stepper motors for precise positioning in CNC machines.
  3. 3D Printers: Controlling the movement of print heads and build platforms.
  4. Drones: Managing the rotation and stability of drone propellers.
  5. Industrial Automation: Motor control in conveyor systems, pumps, and actuators.

Alternative Models

Other motor driver ICs that can be considered as alternatives to the TB67H410FTG,EL include:

  1. L298N: Dual H-bridge motor driver with similar specifications.
  2. DRV8825: Stepper motor driver with adjustable current limit.
  3. A4988: Another popular stepper motor driver with high performance.

These alternative models offer similar functionality and can be used depending on specific application requirements.

Word count: 345 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של TB67H410FTG,EL בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of TB67H410FTG,EL in technical solutions:

  1. Q: What is TB67H410FTG,EL? A: TB67H410FTG,EL is a motor driver IC designed for controlling DC motors or stepper motors in various applications.

  2. Q: What voltage range does TB67H410FTG,EL support? A: TB67H410FTG,EL supports a wide voltage range from 4.5V to 44V, making it suitable for a variety of power supply configurations.

  3. Q: Can TB67H410FTG,EL drive both DC motors and stepper motors? A: Yes, TB67H410FTG,EL can drive both DC motors and bipolar stepper motors.

  4. Q: What is the maximum current rating of TB67H410FTG,EL? A: TB67H410FTG,EL has a maximum current rating of 4A per channel, allowing it to handle high-power motor applications.

  5. Q: Does TB67H410FTG,EL have built-in protection features? A: Yes, TB67H410FTG,EL includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  6. Q: Can TB67H410FTG,EL be controlled using PWM signals? A: Yes, TB67H410FTG,EL supports PWM control, allowing precise speed and direction control of the connected motors.

  7. Q: Is TB67H410FTG,EL compatible with microcontrollers and Arduino boards? A: Yes, TB67H410FTG,EL can be easily interfaced with microcontrollers and Arduino boards through its logic-level inputs.

  8. Q: What is the operating temperature range of TB67H410FTG,EL? A: TB67H410FTG,EL has an operating temperature range of -40°C to 150°C, making it suitable for a wide range of environments.

  9. Q: Can TB67H410FTG,EL be used in battery-powered applications? A: Yes, TB67H410FTG,EL has a low standby current and can be used in battery-powered applications where power efficiency is crucial.

  10. Q: Are there any application examples for TB67H410FTG,EL? A: Yes, TB67H410FTG,EL can be used in various applications such as robotics, CNC machines, 3D printers, and industrial automation systems.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.