Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6124C736MR-G
צפה בפרטים DataSheets

XC6124C736MR-G

Product Overview

Category

XC6124C736MR-G belongs to the category of voltage regulators.

Use

It is used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124C736MR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124C736MR-G is its ability to regulate voltage efficiently and accurately in various electronic applications.

Packaging/Quantity

XC6124C736MR-G is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: 150mA (max)
  • Dropout Voltage: 200mV (typ)
  • Quiescent Current: 40µA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C736MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation with high precision
  • Overcurrent protection to prevent damage to the circuit
  • Thermal shutdown protection to prevent overheating
  • Enable pin for easy control of the regulator

Advantages and Disadvantages

Advantages

  • Small size and lightweight, suitable for compact designs
  • Low power consumption, ideal for battery-powered devices
  • Wide input voltage range allows for versatile applications
  • Overcurrent and thermal shutdown protection enhance circuit safety

Disadvantages

  • Limited output current capacity (150mA max)
  • Dropout voltage of 200mV may affect efficiency in low voltage applications

Working Principles

XC6124C736MR-G operates based on a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of input voltage variations.

Detailed Application Field Plans

XC6124C736MR-G can be used in various electronic applications, including but not limited to: - Mobile devices - Portable audio players - Wearable devices - IoT devices - Battery-powered systems - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C736MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

In conclusion, XC6124C736MR-G is a compact and efficient voltage regulator with high precision and various protection features. Its wide application range makes it a versatile choice for many electronic devices.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6124C736MR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6124C736MR-G in technical solutions:

  1. Question: What is XC6124C736MR-G?
    Answer: XC6124C736MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124C736MR-G?
    Answer: The operating voltage range of XC6124C736MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124C736MR-G work?
    Answer: XC6124C736MR-G works by continuously monitoring the input voltage and comparing it to a preset threshold. When the input voltage falls below or exceeds the threshold, an internal reset signal is generated.

  4. Question: What is the output type of XC6124C736MR-G?
    Answer: XC6124C736MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the typical quiescent current consumption of XC6124C736MR-G?
    Answer: The typical quiescent current consumption of XC6124C736MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124C736MR-G be used for undervoltage and overvoltage detection?
    Answer: Yes, XC6124C736MR-G can be used for both undervoltage and overvoltage detection by setting the appropriate threshold voltage.

  7. Question: What is the accuracy of the voltage detection in XC6124C736MR-G?
    Answer: The accuracy of voltage detection in XC6124C736MR-G is typically ±1.5%.

  8. Question: Can XC6124C736MR-G be used in battery-powered applications?
    Answer: Yes, XC6124C736MR-G can be used in battery-powered applications due to its low quiescent current consumption.

  9. Question: What is the maximum operating temperature range of XC6124C736MR-G?
    Answer: The maximum operating temperature range of XC6124C736MR-G is usually between -40°C and +85°C.

  10. Question: Is XC6124C736MR-G suitable for automotive applications?
    Answer: Yes, XC6124C736MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.