Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6124C716ER-G
צפה בפרטים DataSheets

XC6124C716ER-G

Product Overview

Category

XC6124C716ER-G belongs to the category of voltage regulators.

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6124C716ER-G is available in a small surface-mount package.

Essence

The essence of XC6124C716ER-G lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

XC6124C716ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C716ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6124C716ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • Wide input voltage range makes it suitable for various applications.
  • Low power consumption helps conserve energy.
  • Overcurrent protection ensures the safety of the circuitry.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6124C716ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of voltage regulation techniques, such as a voltage divider network and a feedback loop.

Detailed Application Field Plans

XC6124C716ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C716ER-G are: - XC6206P182MR-G - LM1117MPX-1.8/NOPB - MCP1700T-1802E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 345 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6124C716ER-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6124C716ER-G in technical solutions:

  1. Question: What is XC6124C716ER-G?
    - Answer: XC6124C716ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124C716ER-G?
    - Answer: The operating voltage range of XC6124C716ER-G is from 0.8V to 6.0V.

  3. Question: How does XC6124C716ER-G work?
    - Answer: XC6124C716ER-G continuously monitors the input voltage and compares it with a fixed reference voltage. When the input voltage falls below or exceeds the reference voltage, the output of the IC changes state, indicating an under-voltage or over-voltage condition.

  4. Question: What is the output configuration of XC6124C716ER-G?
    - Answer: XC6124C716ER-G has an open-drain output configuration, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.

  5. Question: What is the typical quiescent current consumption of XC6124C716ER-G?
    - Answer: The typical quiescent current consumption of XC6124C716ER-G is around 1.0µA, making it suitable for low-power applications.

  6. Question: Can XC6124C716ER-G be used for both under-voltage and over-voltage detection?
    - Answer: Yes, XC6124C716ER-G can be configured for both under-voltage and over-voltage detection by connecting the appropriate resistors to the reference voltage pin.

  7. Question: What is the accuracy of XC6124C716ER-G?
    - Answer: The accuracy of XC6124C716ER-G is typically ±1.5% at room temperature.

  8. Question: Can XC6124C716ER-G be used in automotive applications?
    - Answer: Yes, XC6124C716ER-G is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring.

  9. Question: Does XC6124C716ER-G have any built-in delay or hysteresis?
    - Answer: Yes, XC6124C716ER-G has a built-in delay of approximately 200ms and hysteresis of around 10%.

  10. Question: What is the package type of XC6124C716ER-G?
    - Answer: XC6124C716ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.