Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6124C527MR-G
צפה בפרטים DataSheets

XC6124C527MR-G

Product Overview

Category

XC6124C527MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6124C527MR-G comes in a small surface mount package.

Essence

The essence of XC6124C527MR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6124C527MR-G is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.27V ±2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 20µA (typical)

Detailed Pin Configuration

XC6124C527MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6124C527MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive heat, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • Low power consumption helps conserve energy.
  • Stable voltage output ensures reliable performance of connected devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124C527MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6124C527MR-G finds applications in various electronic devices, including: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C527MR-G are: - LM317T - LT1086 - LM7805 - NCP1117

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 346 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6124C527MR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6124C527MR-G in technical solutions:

  1. Question: What is XC6124C527MR-G?
    - Answer: XC6124C527MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124C527MR-G?
    - Answer: The operating voltage range of XC6124C527MR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6124C527MR-G work?
    - Answer: XC6124C527MR-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, the output of the IC becomes active, indicating a low voltage condition.

  4. Question: What is the output type of XC6124C527MR-G?
    - Answer: XC6124C527MR-G has an open-drain output, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6124C527MR-G?
    - Answer: The typical quiescent current consumption of XC6124C527MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124C527MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124C527MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the hysteresis voltage of XC6124C527MR-G?
    - Answer: The hysteresis voltage of XC6124C527MR-G is typically 0.1V, which means the output will remain active until the input voltage rises above the threshold voltage plus the hysteresis voltage.

  8. Question: Can XC6124C527MR-G be used for overvoltage detection?
    - Answer: No, XC6124C527MR-G is specifically designed for undervoltage detection. It is not suitable for overvoltage detection applications.

  9. Question: What is the temperature range in which XC6124C527MR-G can operate?
    - Answer: XC6124C527MR-G can operate within a temperature range of -40°C to +85°C.

  10. Question: Is XC6124C527MR-G RoHS compliant?
    - Answer: Yes, XC6124C527MR-G is RoHS (Restriction of Hazardous Substances) compliant, meaning it does not contain any restricted substances as per the RoHS directive.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.