Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6124A544ER-G
צפה בפרטים DataSheets

XC6124A544ER-G

Product Overview

Category

XC6124A544ER-G belongs to the category of electronic components.

Use

It is used in various electronic devices for voltage regulation and power management purposes.

Characteristics

  • Small form factor
  • Low power consumption
  • High efficiency
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A544ER-G is available in a compact surface-mount package.

Essence

The essence of XC6124A544ER-G lies in its ability to regulate voltage efficiently and reliably, ensuring stable power supply to electronic devices.

Packaging/Quantity

XC6124A544ER-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.0V
  • Output Current: 500mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 35µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A544ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124A544ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the device and connected components by limiting the output current in case of a fault.
  • Thermal shutdown protection: In the event of excessive temperature, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low power consumption helps to extend battery life in portable devices.
  • Wide input voltage range enables compatibility with various power sources.
  • Overcurrent and thermal protection enhance the reliability and safety of the device.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124A544ER-G operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of input voltage variations.

Detailed Application Field Plans

XC6124A544ER-G finds applications in a wide range of electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124A544ER-G are: - XC6206P332MR-G - XC6210B332MR-G - XC6220B332MR-G - XC6230B332MR-G - XC6240B332MR-G

These models have comparable specifications and can be considered as alternatives depending on specific design requirements.

Word count: 416 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6124A544ER-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6124A544ER-G in technical solutions:

  1. Q: What is XC6124A544ER-G? A: XC6124A544ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124A544ER-G? A: The operating voltage range of XC6124A544ER-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6124A544ER-G work? A: XC6124A544ER-G works by continuously monitoring the input voltage and comparing it to a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, the output of the IC changes state, indicating a power supply fault.

  4. Q: What is the output configuration of XC6124A544ER-G? A: XC6124A544ER-G has an open-drain output configuration, which means that it can only pull the output low but not drive it high. An external pull-up resistor is required to provide the high logic level.

  5. Q: What is the typical quiescent current consumption of XC6124A544ER-G? A: The typical quiescent current consumption of XC6124A544ER-G is very low, usually around 1.0µA.

  6. Q: Can XC6124A544ER-G be used in battery-powered applications? A: Yes, XC6124A544ER-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  7. Q: What is the hysteresis voltage of XC6124A544ER-G? A: The hysteresis voltage of XC6124A544ER-G is typically 100mV, which helps prevent false triggering due to small voltage fluctuations.

  8. Q: Is XC6124A544ER-G available in different package options? A: Yes, XC6124A544ER-G is available in various package options, including SOT-25 and USP-4B.

  9. Q: Can XC6124A544ER-G be used for overvoltage protection? A: No, XC6124A544ER-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  10. Q: What are some typical applications of XC6124A544ER-G? A: XC6124A544ER-G can be used in a wide range of applications, such as battery-powered devices, portable electronics, industrial equipment, automotive systems, and more, where monitoring power supply voltages is critical for proper operation.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.