Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6122C740ER-G
צפה בפרטים DataSheets

XC6122C740ER-G

Product Overview

Category

XC6122C740ER-G belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for various applications.

Characteristics

  • Small form factor
  • High reliability
  • Low power consumption
  • Wide operating voltage range

Package

XC6122C740ER-G is available in a compact surface mount package.

Essence

The essence of XC6122C740ER-G lies in its ability to provide stable voltage regulation in electronic circuits.

Packaging/Quantity

XC6122C740ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 1.8V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA (max)
  • Dropout Voltage: 150mV (typ)
  • Quiescent Current: 30µA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C740ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6122C740ER-G provides a stable output voltage of 3.3V regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Low quiescent current: The device consumes minimal current when not actively regulating the voltage.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High reliability ensures consistent performance over a long lifespan.
  • Low power consumption helps conserve energy in battery-powered applications.
  • Wide operating voltage range enables compatibility with various input sources.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the device.

Working Principles

XC6122C740ER-G utilizes a voltage reference and feedback control mechanism to maintain a stable output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output voltage at 3.3V.

Detailed Application Field Plans

XC6122C740ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - IoT devices - Wearable devices - Battery-powered systems - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C740ER-G are: - XC6122C740ER-G-1: Similar specifications with minor variations - XC6122C740ER-G-2: Higher output current capability - XC6122C740ER-G-3: Lower dropout voltage

These alternative models provide flexibility in choosing the most suitable option based on specific requirements.

Word count: 411 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6122C740ER-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6122C740ER-G in technical solutions:

  1. Question: What is XC6122C740ER-G?
    - Answer: XC6122C740ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various electronic devices to monitor and detect voltage levels.

  2. Question: What is the operating voltage range of XC6122C740ER-G?
    - Answer: The operating voltage range of XC6122C740ER-G is typically between 0.7V and 6.0V.

  3. Question: How does XC6122C740ER-G work?
    - Answer: XC6122C740ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal.

  4. Question: What is the purpose of using XC6122C740ER-G in technical solutions?
    - Answer: XC6122C740ER-G is commonly used as a voltage monitoring and detection component in various technical solutions to ensure proper operation and protection of electronic circuits.

  5. Question: Can XC6122C740ER-G be used in battery-powered applications?
    - Answer: Yes, XC6122C740ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  6. Question: What is the output configuration of XC6122C740ER-G?
    - Answer: XC6122C740ER-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.

  7. Question: What is the typical accuracy of XC6122C740ER-G?
    - Answer: The typical accuracy of XC6122C740ER-G is ±1.5% at room temperature.

  8. Question: Can XC6122C740ER-G be used in automotive applications?
    - Answer: Yes, XC6122C740ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: Does XC6122C740ER-G have built-in hysteresis?
    - Answer: Yes, XC6122C740ER-G has a built-in hysteresis feature, which helps to prevent output oscillation near the threshold voltage.

  10. Question: What is the package type of XC6122C740ER-G?
    - Answer: XC6122C740ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.