Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6122C721MR-G
צפה בפרטים DataSheets

XC6122C721MR-G

Product Overview

Category

XC6122C721MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6122C721MR-G is available in a small surface-mount package.

Essence

The essence of XC6122C721MR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C721MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: XC6122C721MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent Protection: It incorporates overcurrent protection to safeguard connected devices.
  • Low Power Consumption: The regulator consumes minimal power, making it suitable for battery-powered applications.
  • Thermal Shutdown: It includes a thermal shutdown feature to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Wide input voltage range makes it compatible with various power sources.
  • Low quiescent current minimizes power consumption.
  • Efficient voltage regulation ensures reliable performance.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122C721MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6122C721MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - IoT devices - Wearable devices - Battery-powered systems - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C721MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - AP2112K-3.3TRG1 - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 343 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6122C721MR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6122C721MR-G in technical solutions:

  1. Question: What is XC6122C721MR-G?
    - Answer: XC6122C721MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122C721MR-G?
    - Answer: The operating voltage range of XC6122C721MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6122C721MR-G work?
    - Answer: XC6122C721MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6122C721MR-G?
    - Answer: XC6122C721MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Question: What is the typical quiescent current consumption of XC6122C721MR-G?
    - Answer: The typical quiescent current consumption of XC6122C721MR-G is around 1.0µA.

  6. Question: Can XC6122C721MR-G be used for undervoltage and overvoltage detection?
    - Answer: Yes, XC6122C721MR-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122C721MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6122C721MR-G is typically ±1.5%.

  8. Question: Can XC6122C721MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122C721MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  9. Question: Does XC6122C721MR-G have built-in hysteresis?
    - Answer: Yes, XC6122C721MR-G has built-in hysteresis, which helps to prevent oscillation and provide stable voltage monitoring.

  10. Question: What is the package type of XC6122C721MR-G?
    - Answer: XC6122C721MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.