XC6122C426MR-G

Product Overview

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

Package: SOT-23-5
Essence: Voltage regulator IC
Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications of XC6122C426MR-G are as follows:

Input Voltage Range: 1.7V to 6.0V
Output Voltage: 4.26V ±2%
Maximum Output Current: 150mA
Dropout Voltage: 200mV (at 100mA)
Quiescent Current: 30µA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C426MR-G has a total of five pins. The pin configuration is as follows:

VIN: Input voltage pin
GND: Ground pin
EN: Enable pin
NC: No connection pin
VOUT: Output voltage pin

Functional Features

The functional features of XC6122C426MR-G include:

Low dropout voltage
Low quiescent current
High output voltage accuracy
Thermal shutdown protection
Short-circuit current limit
Reverse current protection

Advantages and Disadvantages

Advantages: - Wide input voltage range - Small package size - Low power consumption - Stable output voltage

Disadvantages: - Limited maximum output current - Relatively high dropout voltage

Working Principles

XC6122C426MR-G is a linear voltage regulator that uses a feedback mechanism to maintain a stable output voltage. It operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6122C426MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C426MR-G are: - XC6122C4267MR-G - XC6122C4265MR-G - XC6122C4263MR-G - XC6122C4261MR-G

These models have similar specifications and functionality, providing flexibility in choosing the most suitable voltage regulator for specific applications.

In conclusion, XC6122C426MR-G is a voltage regulator IC with a wide input voltage range, stable output voltage, and low power consumption. It is commonly used in battery-powered and portable electronic devices. While it has limitations in terms of maximum output current and dropout voltage, there are alternative models available to meet specific requirements.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6122C426MR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6122C426MR-G in technical solutions:

Q: What is XC6122C426MR-G? A: XC6122C426MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6122C426MR-G? A: The operating voltage range of XC6122C426MR-G is typically between 0.9V and 6.0V.
Q: How does XC6122C426MR-G help in technical solutions? A: XC6122C426MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6122C426MR-G? A: The typical reset voltage threshold of XC6122C426MR-G is 4.26V.
Q: Can XC6122C426MR-G be used in battery-powered applications? A: Yes, XC6122C426MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6122C426MR-G have any built-in delay for the reset signal? A: Yes, XC6122C426MR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6122C426MR-G suitable for automotive applications? A: Yes, XC6122C426MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6122C426MR-G be used in industrial control systems? A: Yes, XC6122C426MR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +85°C.
Q: Does XC6122C426MR-G have any additional features or protection mechanisms? A: Yes, XC6122C426MR-G has built-in overvoltage detection and hysteresis to prevent false triggering due to voltage fluctuations or noise.
Q: What package does XC6122C426MR-G come in? A: XC6122C426MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6122C426MR-G.