Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6122A631ER-G
צפה בפרטים DataSheets

XC6122A631ER-G

Product Overview

Category

XC6122A631ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range

Package

XC6122A631ER-G comes in a small surface-mount package.

Essence

The essence of XC6122A631ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (max)
  • Quiescent Current: 1μA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A631ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • High precision voltage regulation
  • Wide input voltage range
  • Low power consumption

Disadvantages

  • Limited output current capacity
  • Not suitable for high-power applications

Working Principles

XC6122A631ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6122A631ER-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A631ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

Note: The content provided above is approximately 300 words. Additional information may be required to reach the desired word count of 1100 words.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6122A631ER-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6122A631ER-G in technical solutions:

  1. Question: What is XC6122A631ER-G?
    - Answer: XC6122A631ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122A631ER-G?
    - Answer: The operating voltage range of XC6122A631ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122A631ER-G work?
    - Answer: XC6122A631ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the output type of XC6122A631ER-G?
    - Answer: XC6122A631ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6122A631ER-G?
    - Answer: The typical quiescent current consumption of XC6122A631ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6122A631ER-G be used for undervoltage detection?
    - Answer: Yes, XC6122A631ER-G is specifically designed for undervoltage detection, making it suitable for applications where monitoring low voltage conditions is critical.

  7. Question: What is the accuracy of XC6122A631ER-G?
    - Answer: The accuracy of XC6122A631ER-G is typically ±1.5% at room temperature.

  8. Question: Can XC6122A631ER-G be used in automotive applications?
    - Answer: Yes, XC6122A631ER-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  9. Question: Does XC6122A631ER-G have any built-in delay time?
    - Answer: Yes, XC6122A631ER-G has a built-in fixed delay time of approximately 200ms to prevent false triggering due to voltage fluctuations or noise.

  10. Question: What package does XC6122A631ER-G come in?
    - Answer: XC6122A631ER-G is available in a SOT-23-3 package, which is a small surface-mount package commonly used in electronic devices.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.