Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6122A247ER-G
צפה בפרטים DataSheets

XC6122A247ER-G

Product Overview

Category

XC6122A247ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122A247ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6122A247ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6122A247ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A247ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122A247ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: In the event of excessive temperature rise, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size and lightweight make it suitable for space-constrained applications.
  • Low power consumption helps in energy-efficient designs.
  • High precision voltage regulation ensures accurate output.
  • Wide input voltage range allows compatibility with various power sources.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122A247ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output. The enable pin allows the user to turn the regulator on or off as required.

Detailed Application Field Plans

XC6122A247ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6122A247ER-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These models have comparable specifications and can be used as alternatives depending on specific requirements.

Word count: 346 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6122A247ER-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6122A247ER-G in technical solutions:

  1. Question: What is XC6122A247ER-G?
    - Answer: XC6122A247ER-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6122A247ER-G?
    - Answer: The operating voltage range of XC6122A247ER-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6122A247ER-G help in technical solutions?
    - Answer: XC6122A247ER-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level. This ensures proper initialization and prevents erratic behavior during power-up or voltage fluctuations.

  4. Question: What is the reset output type of XC6122A247ER-G?
    - Answer: XC6122A247ER-G has an active-low reset output, which means the output goes low when the voltage drops below the threshold.

  5. Question: What is the typical reset threshold voltage of XC6122A247ER-G?
    - Answer: The typical reset threshold voltage of XC6122A247ER-G is 2.47V.

  6. Question: Can the reset threshold voltage be adjusted in XC6122A247ER-G?
    - Answer: No, the reset threshold voltage of XC6122A247ER-G is fixed and cannot be adjusted.

  7. Question: What is the quiescent current consumption of XC6122A247ER-G?
    - Answer: The quiescent current consumption of XC6122A247ER-G is typically very low, usually in the microampere range.

  8. Question: Is XC6122A247ER-G suitable for battery-powered applications?
    - Answer: Yes, XC6122A247ER-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  9. Question: Can XC6122A247ER-G be used in automotive applications?
    - Answer: Yes, XC6122A247ER-G is designed to meet automotive standards and can be used in automotive applications.

  10. Question: What package does XC6122A247ER-G come in?
    - Answer: XC6122A247ER-G comes in a SOT-23-5 package, which is a small surface-mount package with five pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.