התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6121D634MR-G

XC6121D634MR-G

Product Overview

Category

XC6121D634MR-G belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6121D634MR-G is available in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6121D634MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6121D634MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The XC6121D634MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • Low power consumption contributes to energy efficiency.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

The XC6121D634MR-G operates based on a feedback control mechanism. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6121D634MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121D634MR-G are: - XC6206P332MR - XC6206P332PR - XC6206P332DR - XC6206P332FR

These models offer similar voltage regulation capabilities and package options, providing flexibility in design choices.

In conclusion, XC6121D634MR-G is a voltage regulator with compact size, low power consumption, and high efficiency. It is commonly used in various electronic devices and offers stable voltage output. While it has limitations in terms of output current and input voltage range, there are alternative models available to suit different requirements.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6121D634MR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6121D634MR-G in technical solutions:

Q1: What is XC6121D634MR-G? A1: XC6121D634MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage crosses a certain threshold.

Q2: What is the operating voltage range of XC6121D634MR-G? A2: The operating voltage range of XC6121D634MR-G is from 0.8V to 6.0V.

Q3: What is the typical quiescent current consumption of XC6121D634MR-G? A3: The typical quiescent current consumption of XC6121D634MR-G is 1.0µA.

Q4: How does XC6121D634MR-G detect voltage levels? A4: XC6121D634MR-G uses a built-in voltage reference and comparator to detect voltage levels. When the input voltage exceeds the threshold set by the internal reference, the output pin changes state.

Q5: Can XC6121D634MR-G be used for undervoltage detection? A5: Yes, XC6121D634MR-G can be used for undervoltage detection. It provides an output signal when the input voltage falls below the threshold voltage.

Q6: What is the output configuration of XC6121D634MR-G? A6: XC6121D634MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.

Q7: What is the maximum voltage that XC6121D634MR-G can withstand on its input pin? A7: The maximum voltage that XC6121D634MR-G can withstand on its input pin is 10V.

Q8: Can XC6121D634MR-G be used in battery-powered applications? A8: Yes, XC6121D634MR-G can be used in battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

Q9: Does XC6121D634MR-G have built-in hysteresis? A9: Yes, XC6121D634MR-G has built-in hysteresis, which helps prevent output oscillation near the threshold voltage.

Q10: What is the package type of XC6121D634MR-G? A10: XC6121D634MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that these answers are based on general information about XC6121D634MR-G. For specific details and application requirements, it is recommended to refer to the datasheet or consult the manufacturer's technical support.