Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6120N202NR-G
צפה בפרטים DataSheets

XC6120N202NR-G

Product Overview

Category

XC6120N202NR-G belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6120N202NR-G is available in a small surface-mount package.

Essence

The essence of XC6120N202NR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.0V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6120N202NR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6120N202NR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption makes it suitable for battery-powered applications.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6120N202NR-G operates on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6120N202NR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6120N202NR-G are: - XC6206P302MR-G - LM1117IMPX-2.85/NOPB - MCP1700T-3302E/TT

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6120N202NR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6120N202NR-G in technical solutions:

1. What is XC6120N202NR-G? - XC6120N202NR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a certain threshold.

2. What is the operating voltage range of XC6120N202NR-G? - The operating voltage range of XC6120N202NR-G is from 0.8V to 6.0V.

3. How does XC6120N202NR-G work? - XC6120N202NR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage crosses the threshold, it triggers the output signal.

4. What is the output type of XC6120N202NR-G? - XC6120N202NR-G has an open-drain output type, which means it can sink current but cannot source current.

5. What is the typical quiescent current of XC6120N202NR-G? - The typical quiescent current of XC6120N202NR-G is around 1.0µA.

6. Can XC6120N202NR-G be used for overvoltage protection? - No, XC6120N202NR-G is not designed for overvoltage protection. It is primarily used as a voltage monitoring device.

7. What is the accuracy of the voltage detection in XC6120N202NR-G? - The accuracy of voltage detection in XC6120N202NR-G is typically ±1.5%.

8. Can XC6120N202NR-G be used in battery-powered applications? - Yes, XC6120N202NR-G can be used in battery-powered applications as it has a low quiescent current and wide operating voltage range.

9. What is the temperature range for XC6120N202NR-G? - The temperature range for XC6120N202NR-G is from -40°C to +85°C.

10. Can XC6120N202NR-G be used in automotive applications? - Yes, XC6120N202NR-G is suitable for automotive applications as it meets the AEC-Q100 standard for automotive electronics.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of XC6120N202NR-G.