XC6118C32AMR-G
Product Overview
Category
XC6118C32AMR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize the voltage in electronic circuits.
Characteristics
- Small size
- Low power consumption
- High accuracy
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6118C32AMR-G comes in a small surface-mount package.
Essence
The essence of XC6118C32AMR-G is its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
XC6118C32AMR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.2V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118C32AMR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation and stabilization
- Overcurrent protection
- Thermal shutdown protection
- Low quiescent current
- Fast response time
Advantages and Disadvantages
Advantages
- Small size allows for space-saving designs
- Low power consumption increases overall efficiency
- Wide input voltage range provides flexibility in various applications
- Overcurrent and thermal shutdown protection enhance device safety
- Fast response time ensures quick voltage stabilization
Disadvantages
- Limited output current may not be suitable for high-power applications
- Dropout voltage may cause a slight voltage drop across the regulator
Working Principles
XC6118C32AMR-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance in the feedback loop to maintain a stable output voltage, regardless of changes in input voltage or load conditions. The overcurrent protection feature monitors the output current and shuts down the regulator if it exceeds a certain threshold. Similarly, the thermal shutdown protection activates when the temperature exceeds a safe limit, preventing damage to the device.
Detailed Application Field Plans
XC6118C32AMR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C32AMR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 342 words
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6118C32AMR-G בפתרונות טכניים
Sure! Here are 10 common questions and answers related to the application of XC6118C32AMR-G in technical solutions:
Q: What is XC6118C32AMR-G? A: XC6118C32AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C32AMR-G? A: The operating voltage range of XC6118C32AMR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C32AMR-G help in technical solutions? A: XC6118C32AMR-G helps in technical solutions by ensuring proper system initialization and preventing data corruption or malfunctioning due to unstable power supply voltages.
Q: What is the typical reset voltage threshold of XC6118C32AMR-G? A: The typical reset voltage threshold of XC6118C32AMR-G is 3.2V.
Q: Can XC6118C32AMR-G be used in battery-powered applications? A: Yes, XC6118C32AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6118C32AMR-G have any built-in delay for the reset signal? A: Yes, XC6118C32AMR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118C32AMR-G suitable for automotive applications? A: Yes, XC6118C32AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6118C32AMR-G be used in industrial control systems? A: Yes, XC6118C32AMR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.
Q: Does XC6118C32AMR-G have any additional features apart from voltage detection? A: Yes, XC6118C32AMR-G also includes a manual reset input and an open-drain output for flexibility in system design.
Q: Is XC6118C32AMR-G available in different package options? A: Yes, XC6118C32AMR-G is available in various package options such as SOT-25, USP-4B05, and DFN2020-6.