XC6118C08CGR-G
Product Overview
Category
XC6118C08CGR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Small size
- Low power consumption
- High accuracy
- Wide input voltage range
Package
XC6118C08CGR-G is available in a compact surface mount package.
Essence
The essence of XC6118C08CGR-G lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 0.8V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118C08CGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Low dropout voltage
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
- Reverse polarity protection
Advantages and Disadvantages
Advantages
- Small form factor allows for space-saving designs
- Low power consumption extends battery life
- Wide input voltage range provides flexibility in various applications
- Built-in protection features enhance reliability
Disadvantages
- Limited output current may not be suitable for high-power applications
- Higher cost compared to non-regulated voltage sources
Working Principles
XC6118C08CGR-G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage regardless of changes in the input voltage or load conditions. The internal circuitry adjusts the resistance to regulate the output voltage.
Detailed Application Field Plans
XC6118C08CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C08CGR-G are: - LM1117-3.3: A 3.3V voltage regulator with similar characteristics - LT1761ES5-3.3: Low dropout voltage regulator with a fixed 3.3V output - MCP1700-3302E/TO: Low quiescent current LDO regulator with a 3.3V output
These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.
Word count: 320 words
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6118C08CGR-G בפתרונות טכניים
Sure! Here are 10 common questions and answers related to the application of XC6118C08CGR-G in technical solutions:
Q: What is XC6118C08CGR-G? A: XC6118C08CGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.
Q: What is the operating voltage range of XC6118C08CGR-G? A: The operating voltage range of XC6118C08CGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C08CGR-G work? A: XC6118C08CGR-G continuously monitors the input voltage and provides a reset signal when the voltage falls below a certain threshold.
Q: What is the typical reset threshold voltage of XC6118C08CGR-G? A: The typical reset threshold voltage of XC6118C08CGR-G is 2.93V.
Q: Can XC6118C08CGR-G be used in battery-powered applications? A: Yes, XC6118C08CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0μA.
Q: Does XC6118C08CGR-G have any built-in delay time? A: Yes, XC6118C08CGR-G has a built-in delay time of typically 200ms to prevent false resets during voltage fluctuations.
Q: Is XC6118C08CGR-G suitable for automotive applications? A: Yes, XC6118C08CGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Can XC6118C08CGR-G be used in both digital and analog circuits? A: Yes, XC6118C08CGR-G can be used in both digital and analog circuits as it provides a clean reset signal.
Q: What is the package type of XC6118C08CGR-G? A: XC6118C08CGR-G is available in a compact SOT-25 package.
Q: Are there any application notes or reference designs available for XC6118C08CGR-G? A: Yes, the manufacturer provides application notes and reference designs to help users integrate XC6118C08CGR-G into their technical solutions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's documentation for XC6118C08CGR-G.