התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6109C46ANR-G

XC6109C46ANR-G

Product Overview

Category

XC6109C46ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency

Package

XC6109C46ANR-G is available in a small outline package (SOP) format.

Essence

The essence of this product lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

XC6109C46ANR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.8V - 5.0V
  • Maximum Output Current: 100mA
  • Quiescent Current: 30µA (typical)
  • Dropout Voltage: 200mV (typical)

Detailed Pin Configuration

The XC6109C46ANR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. CE (Chip Enable)

Functional Features

  • Voltage regulation: The XC6109C46ANR-G ensures a stable output voltage within the specified range.
  • Overcurrent protection: It includes built-in protection mechanisms to prevent damage due to excessive current flow.
  • Low quiescent current: The device consumes minimal power when not actively regulating voltage.
  • Thermal shutdown: In case of overheating, the XC6109C46ANR-G shuts down to protect itself and the connected circuitry.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Compact size
  • Overcurrent protection
  • Low power consumption

Disadvantages

  • Limited maximum output current (100mA)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The XC6109C46ANR-G operates by comparing the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage within the specified range. The chip enable (CE) pin allows for control of the device's operation.

Detailed Application Field Plans

XC6109C46ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6109C46ANR-G include: - XC6109C46ANR-GP - XC6109C46ANR-GT - XC6109C46ANR-GU

These models have slight variations in specifications or package types, providing flexibility for different design requirements.

Word count: 321 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6109C46ANR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6109C46ANR-G in technical solutions:

  1. Question: What is XC6109C46ANR-G?
    - Answer: XC6109C46ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6109C46ANR-G?
    - Answer: The operating voltage range of XC6109C46ANR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6109C46ANR-G help in technical solutions?
    - Answer: XC6109C46ANR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6109C46ANR-G?
    - Answer: XC6109C46ANR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve a logic high level.

  5. Question: What is the typical reset threshold voltage of XC6109C46ANR-G?
    - Answer: The typical reset threshold voltage of XC6109C46ANR-G is 4.6V.

  6. Question: Can XC6109C46ANR-G be used in battery-powered applications?
    - Answer: Yes, XC6109C46ANR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  7. Question: Does XC6109C46ANR-G have any built-in delay for the reset signal?
    - Answer: Yes, XC6109C46ANR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: What is the temperature range in which XC6109C46ANR-G can operate?
    - Answer: XC6109C46ANR-G can operate within a temperature range of -40°C to +85°C.

  9. Question: Can XC6109C46ANR-G be used in automotive applications?
    - Answer: Yes, XC6109C46ANR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  10. Question: Is XC6109C46ANR-G available in different package options?
    - Answer: Yes, XC6109C46ANR-G is available in various package options, such as SOT-23-5 and USP-6B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6109C46ANR-G.