XC6108N48DGR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize voltage in electronic circuits.
XC6108N48DGR-G is packaged in a small SOT-23-5 package.
The essence of XC6108N48DGR-G is its ability to provide stable and regulated voltage output in various electronic applications.
XC6108N48DGR-G is typically available in reels containing 3000 units per reel.
XC6108N48DGR-G has the following pin configuration:
XC6108N48DGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. By continuously monitoring and adjusting, it compensates for any changes in the input voltage or load conditions.
XC6108N48DGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics - Industrial automation
Some alternative models that can be considered as alternatives to XC6108N48DGR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G
These models offer similar functionality and characteristics, providing options for different design requirements.
Word count: 431 words
Sure! Here are 10 common questions and answers related to the application of XC6108N48DGR-G in technical solutions:
Q: What is XC6108N48DGR-G? A: XC6108N48DGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6108N48DGR-G? A: The operating voltage range of XC6108N48DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108N48DGR-G work? A: XC6108N48DGR-G monitors the input voltage and provides a digital output signal when the voltage exceeds or falls below a preset threshold.
Q: What is the typical threshold voltage of XC6108N48DGR-G? A: The typical threshold voltage of XC6108N48DGR-G is 4.8V.
Q: Can XC6108N48DGR-G be used in battery-powered applications? A: Yes, XC6108N48DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Is XC6108N48DGR-G suitable for automotive applications? A: Yes, XC6108N48DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Does XC6108N48DGR-G have built-in hysteresis? A: Yes, XC6108N48DGR-G has built-in hysteresis to prevent oscillation and ensure stable voltage monitoring.
Q: What is the output configuration of XC6108N48DGR-G? A: XC6108N48DGR-G has an open-drain output configuration, which requires an external pull-up resistor.
Q: Can XC6108N48DGR-G be used in industrial control systems? A: Yes, XC6108N48DGR-G can be used in industrial control systems as it operates over a wide temperature range (-40°C to +105°C).
Q: Is XC6108N48DGR-G available in different package options? A: Yes, XC6108N48DGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.