התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6108N47DGR-G

XC6108N47DGR-G

Product Overview

Category

XC6108N47DGR-G belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation capabilities
  • Power management functionality
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6108N47DGR-G is available in a small surface-mount package, which makes it suitable for use in compact electronic devices.

Essence

The essence of XC6108N47DGR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic circuits.

Packaging/Quantity

XC6108N47DGR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.7V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N47DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

XC6108N47DGR-G offers the following functional features:

  • Voltage regulation: It ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current within safe limits.
  • Thermal shutdown protection: It prevents damage due to excessive heat by shutting down the device when the temperature exceeds a certain threshold.
  • Low quiescent current: It minimizes power consumption when the device is in standby mode.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Wide input voltage range provides flexibility in various applications.
  • Overcurrent and thermal shutdown protection enhance circuit safety.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the device.

Working Principles

XC6108N47DGR-G operates based on the principle of linear voltage regulation. It utilizes an internal voltage reference and feedback mechanism to maintain a constant output voltage, regardless of changes in the input voltage or load conditions. The device adjusts its internal resistance to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6108N47DGR-G finds applications in various electronic systems, including but not limited to:

  1. Portable electronic devices: Such as smartphones, tablets, and portable media players.
  2. IoT devices: Including smart home appliances, wearable devices, and sensor nodes.
  3. Battery-powered systems: Such as wireless communication devices, remote controls, and medical devices.
  4. Automotive electronics: For voltage regulation in automotive infotainment systems, lighting modules, and control units.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6108N47DGR-G are:

  1. XC6206P332MR-G
  2. XC6220B332MR-G
  3. XC6219B332MR-G
  4. XC6220H332MR-G
  5. XC6220L332MR-G

These models have comparable specifications and can be considered as alternatives depending on specific application requirements.

Word count: 534 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6108N47DGR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6108N47DGR-G in technical solutions:

  1. Q: What is XC6108N47DGR-G? A: XC6108N47DGR-G is a voltage detector IC (Integrated Circuit) used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6108N47DGR-G? A: The operating voltage range of XC6108N47DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N47DGR-G work? A: XC6108N47DGR-G monitors the input voltage and provides a digital output signal when the voltage falls below a certain threshold level.

  4. Q: What is the purpose of using XC6108N47DGR-G in technical solutions? A: XC6108N47DGR-G is commonly used to detect power supply failures or abnormal voltage levels, triggering appropriate actions or alarms in the system.

  5. Q: Can XC6108N47DGR-G be used in battery-powered applications? A: Yes, XC6108N47DGR-G can be used in battery-powered applications as it operates within a wide voltage range suitable for such systems.

  6. Q: Is XC6108N47DGR-G compatible with different microcontrollers or processors? A: Yes, XC6108N47DGR-G is compatible with various microcontrollers and processors as it provides a digital output signal that can be easily interfaced with these devices.

  7. Q: What is the typical quiescent current consumption of XC6108N47DGR-G? A: The typical quiescent current consumption of XC6108N47DGR-G is very low, usually around 1.0µA.

  8. Q: Can XC6108N47DGR-G be used in automotive applications? A: Yes, XC6108N47DGR-G is suitable for automotive applications as it can withstand a wide temperature range and has built-in protection features.

  9. Q: Does XC6108N47DGR-G have any adjustable parameters? A: No, XC6108N47DGR-G does not have any adjustable parameters. It operates based on its fixed threshold voltage.

  10. Q: Are there any specific precautions to consider when using XC6108N47DGR-G? A: It is recommended to follow the manufacturer's datasheet and guidelines for proper usage, including input voltage limitations, decoupling capacitor requirements, and thermal considerations.

Please note that the answers provided here are general and may vary depending on the specific application and requirements.