התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6108N46DGR-G

XC6108N46DGR-G

Product Overview

Category

XC6108N46DGR-G belongs to the category of electronic components.

Use

It is commonly used in various electronic devices and circuits for voltage regulation purposes.

Characteristics

  • Voltage regulator
  • Small form factor
  • Low power consumption
  • High precision
  • Wide input voltage range

Package

XC6108N46DGR-G is available in a compact surface mount package.

Essence

The essence of XC6108N46DGR-G lies in its ability to regulate voltage efficiently and accurately, ensuring stable power supply to connected electronic components.

Packaging/Quantity

XC6108N46DGR-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.6V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N46DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N46DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected components.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.
  • Low quiescent current: The low quiescent current minimizes power consumption when the load is light.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • Wide input voltage range makes it suitable for a wide range of applications.
  • High precision ensures accurate voltage regulation.
  • Low power consumption helps conserve energy.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6108N46DGR-G operates on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6108N46DGR-G finds applications in various electronic devices and circuits, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT (Internet of Things) devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6108N46DGR-G include: - XC6206P462MR-G - LM1117IMPX-4.6/NOPB - MCP1700T-4602E/TT

These alternatives can be considered based on specific requirements and availability.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6108N46DGR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6108N46DGR-G in technical solutions:

  1. Question: What is XC6108N46DGR-G?
    - Answer: XC6108N46DGR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6108N46DGR-G?
    - Answer: The operating voltage range of XC6108N46DGR-G is typically between 0.7V and 6.0V.

  3. Question: What is the output voltage of XC6108N46DGR-G?
    - Answer: XC6108N46DGR-G has a fixed output voltage of 4.6V.

  4. Question: How does XC6108N46DGR-G detect voltage levels?
    - Answer: XC6108N46DGR-G uses a built-in voltage reference and comparator to monitor the input voltage and provide an output signal when it falls below the specified threshold.

  5. Question: Can XC6108N46DGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108N46DGR-G can be used in battery-powered applications as long as the operating voltage range is within the limits of the device.

  6. Question: What is the quiescent current consumption of XC6108N46DGR-G?
    - Answer: The quiescent current consumption of XC6108N46DGR-G is typically around 1.0µA, making it suitable for low-power applications.

  7. Question: Is XC6108N46DGR-G available in different package options?
    - Answer: Yes, XC6108N46DGR-G is available in various package options, including SOT-25 and USP-6B.

  8. Question: Can XC6108N46DGR-G be used for overvoltage protection?
    - Answer: No, XC6108N46DGR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range of XC6108N46DGR-G?
    - Answer: The temperature range of XC6108N46DGR-G is typically between -40°C and +85°C.

  10. Question: Are there any application notes or reference designs available for XC6108N46DGR-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website that can help with the implementation of XC6108N46DGR-G in different technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.