התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6108N29DGR-G

XC6108N29DGR-G

Product Overview

Category

XC6108N29DGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6108N29DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N29DGR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.9V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N29DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108N29DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device incorporates overcurrent protection to safeguard connected components.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6108N29DGR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6108N29DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N29DGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 346 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6108N29DGR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6108N29DGR-G in technical solutions:

  1. Q: What is XC6108N29DGR-G? A: XC6108N29DGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N29DGR-G? A: The operating voltage range of XC6108N29DGR-G is typically between 0.7V and 10V.

  3. Q: How does XC6108N29DGR-G work? A: XC6108N29DGR-G works by comparing the input voltage with a fixed reference voltage and generating an output signal when the input voltage falls below a certain threshold.

  4. Q: What is the output type of XC6108N29DGR-G? A: XC6108N29DGR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: What is the typical quiescent current consumption of XC6108N29DGR-G? A: The typical quiescent current consumption of XC6108N29DGR-G is around 1.5µA.

  6. Q: Can XC6108N29DGR-G be used in battery-powered applications? A: Yes, XC6108N29DGR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Q: What is the accuracy of the voltage detection threshold in XC6108N29DGR-G? A: The accuracy of the voltage detection threshold in XC6108N29DGR-G is typically ±1.5%.

  8. Q: Can XC6108N29DGR-G be used for overvoltage protection? A: No, XC6108N29DGR-G is designed for undervoltage detection only and does not provide overvoltage protection.

  9. Q: What is the temperature range of XC6108N29DGR-G? A: The temperature range of XC6108N29DGR-G is typically between -40°C and +85°C.

  10. Q: What are some typical applications of XC6108N29DGR-G? A: XC6108N29DGR-G can be used in various applications such as battery-powered devices, portable electronics, industrial equipment, and automotive systems for undervoltage monitoring and power supply supervision.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108N29DGR-G.