XC6108N28BGR-G belongs to the category of integrated circuits (ICs).
This product is commonly used as a voltage detector in various electronic devices.
XC6108N28BGR-G is packaged in a SOT-25 package. It is available in reels of 3,000 units.
The XC6108N28BGR-G has the following pin configuration:
```
| | --| VDD|-- Pin 1: Power supply --| GND|-- Pin 2: Ground --| OUT|-- Pin 3: Output |____| ```
The XC6108N28BGR-G operates by comparing the input voltage with a reference voltage. When the input voltage falls below the threshold, the output pin is activated, indicating a low voltage condition. The built-in delay circuit prevents false triggering caused by voltage fluctuations or noise.
The XC6108N28BGR-G can be used in various electronic devices and systems that require voltage monitoring and protection. Some potential application fields include:
Here are some alternative models that offer similar functionality:
Please note that these alternative models may have different pin configurations and specifications.
Sure! Here are 10 common questions and answers related to the application of XC6108N28BGR-G in technical solutions:
Q: What is XC6108N28BGR-G? A: XC6108N28BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108N28BGR-G? A: The operating voltage range of XC6108N28BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108N28BGR-G help in technical solutions? A: XC6108N28BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level.
Q: Can XC6108N28BGR-G be used in battery-powered applications? A: Yes, XC6108N28BGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the output type of XC6108N28BGR-G? A: XC6108N28BGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.
Q: What is the typical reset threshold voltage of XC6108N28BGR-G? A: The typical reset threshold voltage of XC6108N28BGR-G is 2.8V, but it can be adjusted using external resistors.
Q: Does XC6108N28BGR-G have a built-in delay circuit? A: Yes, XC6108N28BGR-G has a built-in delay circuit that ensures a stable reset signal is provided for a specific duration after the power supply voltage rises above the threshold.
Q: Can XC6108N28BGR-G be used in automotive applications? A: Yes, XC6108N28BGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.
Q: What is the package type of XC6108N28BGR-G? A: XC6108N28BGR-G comes in a small SOT-25 package, which is compact and easy to integrate into various designs.
Q: Are there any application notes or reference designs available for XC6108N28BGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement XC6108N28BGR-G in their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of XC6108N28BGR-G.