Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6108N14BGR-G
צפה בפרטים DataSheets

XC6108N14BGR-G

Product Overview

Category

XC6108N14BGR-G belongs to the category of electronic components.

Use

It is commonly used in various electronic devices and circuits for voltage regulation purposes.

Characteristics

  • Voltage regulator IC
  • Low dropout voltage
  • High output current capability
  • Small package size
  • Wide input voltage range

Package

XC6108N14BGR-G is available in a small surface mount package.

Essence

The essence of XC6108N14BGR-G lies in its ability to regulate voltage efficiently and reliably in electronic circuits.

Packaging/Quantity

XC6108N14BGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.4V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N14BGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient voltage regulation even when the input voltage is close to the desired output voltage.
  • High output current capability allows it to power a wide range of electronic components.
  • Wide input voltage range provides flexibility in various applications.
  • Low quiescent current minimizes power consumption when the device is not actively regulating voltage.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Small package size
  • Wide input voltage range
  • High output current capability

Disadvantages

  • Limited output voltage options
  • Relatively low maximum output current compared to some other voltage regulators

Working Principles

XC6108N14BGR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains stable even when the input voltage fluctuates.

Detailed Application Field Plans

XC6108N14BGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to XC6108N14BGR-G include: - XC6206P332MR-G - XC6210B332MR-G - XC6220B332MR-G - XC6230B332MR-G - XC6240B332MR-G

These models offer similar voltage regulation capabilities with slight variations in specifications and package sizes.

Word count: 346 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6108N14BGR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6108N14BGR-G in technical solutions:

  1. Q: What is XC6108N14BGR-G? A: XC6108N14BGR-G is a voltage detector IC (Integrated Circuit) used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6108N14BGR-G? A: The operating voltage range of XC6108N14BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N14BGR-G work? A: XC6108N14BGR-G monitors the input voltage and provides a reset signal when the voltage drops below a specified threshold, ensuring proper operation of the device.

  4. Q: What is the typical current consumption of XC6108N14BGR-G? A: The typical current consumption of XC6108N14BGR-G is very low, usually around 1.5µA.

  5. Q: Can XC6108N14BGR-G be used in battery-powered applications? A: Yes, XC6108N14BGR-G is suitable for battery-powered applications due to its low current consumption.

  6. Q: What is the output type of XC6108N14BGR-G? A: XC6108N14BGR-G has an open-drain output, which requires an external pull-up resistor.

  7. Q: What is the maximum reset time delay of XC6108N14BGR-G? A: The maximum reset time delay of XC6108N14BGR-G is typically 200ms.

  8. Q: Can XC6108N14BGR-G be used in automotive applications? A: Yes, XC6108N14BGR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

  9. Q: Does XC6108N14BGR-G have any built-in protection features? A: Yes, XC6108N14BGR-G includes built-in overcurrent protection and thermal shutdown features to ensure safe operation.

  10. Q: What package does XC6108N14BGR-G come in? A: XC6108N14BGR-G is available in a small SOT-23-5 package, which is commonly used in many electronic devices.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of XC6108N14BGR-G.