Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6108C50CGR-G
צפה בפרטים DataSheets

XC6108C50CGR-G

Product Overview

Category

XC6108C50CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High output current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC6108C50CGR-G is available in a compact surface-mount package.

Essence

The essence of XC6108C50CGR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC6108C50CGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.0V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C50CGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C50CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It can operate with a minimal voltage difference between the input and output.
  • Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds a certain threshold, preventing damage.
  • Short circuit protection: In case of a short circuit, XC6108C50CGR-G limits the output current to protect the circuitry.

Advantages and Disadvantages

Advantages

  • High output current capability
  • Compact package size
  • Thermal and short circuit protection
  • Low dropout voltage

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Relatively low quiescent current

Working Principles

XC6108C50CGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6108C50CGR-G finds applications in various electronic devices, including: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C50CGR-G are: - LM1117-5.0 - MCP1700-5002E/TO - LT1763-5.0 - TS2950CT-5.0

These models offer similar voltage regulation capabilities and can be used as replacements depending on specific requirements.

Word count: 335 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6108C50CGR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6108C50CGR-G in technical solutions:

  1. Q: What is XC6108C50CGR-G? A: XC6108C50CGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108C50CGR-G? A: The operating voltage range of XC6108C50CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C50CGR-G work? A: XC6108C50CGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the output type of XC6108C50CGR-G? A: XC6108C50CGR-G has an open-drain output type, which means it can be connected to other devices or microcontrollers.

  5. Q: What is the typical quiescent current consumption of XC6108C50CGR-G? A: The typical quiescent current consumption of XC6108C50CGR-G is very low, usually around 1.0µA.

  6. Q: Can XC6108C50CGR-G be used in battery-powered applications? A: Yes, XC6108C50CGR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Q: What is the accuracy of the voltage detection threshold in XC6108C50CGR-G? A: The voltage detection threshold accuracy of XC6108C50CGR-G is typically ±1.5%.

  8. Q: Can XC6108C50CGR-G be used in automotive applications? A: Yes, XC6108C50CGR-G is designed to meet the requirements of automotive applications and can operate in a wide temperature range.

  9. Q: Does XC6108C50CGR-G have built-in hysteresis? A: Yes, XC6108C50CGR-G has built-in hysteresis, which helps prevent oscillation or chattering of the output signal near the detection threshold.

  10. Q: What package does XC6108C50CGR-G come in? A: XC6108C50CGR-G is available in a compact SOT-25 package, which is small and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C50CGR-G.