XC6108C49DGR-G
Product Overview
Category
XC6108C49DGR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Small size and lightweight
- High precision voltage regulation
- Low power consumption
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6108C49DGR-G is available in a compact SOT-89 package.
Essence
The essence of XC6108C49DGR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
This product is typically packaged in reels, with each reel containing a specific quantity of XC6108C49DGR-G units.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Output Current: Up to 100mA
- Quiescent Current: 30µA (typical)
- Dropout Voltage: 200mV (typical)
Detailed Pin Configuration
XC6108C49DGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: XC6108C49DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds a certain threshold.
- Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Compact size allows for easy integration into space-constrained designs.
- High precision voltage regulation ensures reliable performance.
- Low power consumption helps conserve energy.
- Wide input voltage range provides flexibility in various applications.
Disadvantages
- Limited output current capacity may not be suitable for high-power devices.
- Dropout voltage can cause a slight voltage drop across the regulator.
Working Principles
XC6108C49DGR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.
Detailed Application Field Plans
XC6108C49DGR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6108C49DGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3
These models can be considered as alternatives based on specific requirements and design considerations.
Word count: 314 words
רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6108C49DGR-G בפתרונות טכניים
Sure! Here are 10 common questions and answers related to the application of XC6108C49DGR-G in technical solutions:
Q: What is XC6108C49DGR-G? A: XC6108C49DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108C49DGR-G? A: The operating voltage range of XC6108C49DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C49DGR-G help in technical solutions? A: XC6108C49DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: Can XC6108C49DGR-G be used in battery-powered applications? A: Yes, XC6108C49DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: What is the typical reset voltage threshold of XC6108C49DGR-G? A: The typical reset voltage threshold of XC6108C49DGR-G is 4.9V.
Q: Does XC6108C49DGR-G have an adjustable reset voltage threshold? A: No, XC6108C49DGR-G does not have an adjustable reset voltage threshold. It has a fixed threshold value.
Q: What is the output type of XC6108C49DGR-G? A: XC6108C49DGR-G has an active-low output type, which means the reset signal is active when the voltage drops below the threshold.
Q: Can XC6108C49DGR-G be used in automotive applications? A: Yes, XC6108C49DGR-G can be used in automotive applications as it meets the requirements for automotive-grade components.
Q: What is the typical response time of XC6108C49DGR-G? A: The typical response time of XC6108C49DGR-G is around 1ms, ensuring a quick reset signal when the voltage drops below the threshold.
Q: Is XC6108C49DGR-G available in different package options? A: Yes, XC6108C49DGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different application requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C49DGR-G.