Torex Semiconductor Ltd
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
XC6108C41DGR-G
צפה בפרטים DataSheets

XC6108C41DGR-G

Product Overview

Category

XC6108C41DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supply.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High accuracy
  • Thermal shutdown protection
  • Overcurrent protection

Package

XC6108C41DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C41DGR-G lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

XC6108C41DGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.1V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C41DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108C41DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It can operate efficiently even when the input voltage is close to the desired output voltage.
  • Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds a certain threshold, preventing damage.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow during abnormal conditions.

Advantages and Disadvantages

Advantages

  • High accuracy in voltage regulation
  • Compact size and surface-mount package
  • Low quiescent current consumption
  • Reliable thermal and overcurrent protection

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Dropout voltage may affect efficiency in certain applications

Working Principles

XC6108C41DGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.

Detailed Application Field Plans

XC6108C41DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C41DGR-G are: - LM1117-4.1 - LT1763-4.1 - MCP1703-4102E/TO

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6108C41DGR-G is a voltage regulator with excellent voltage regulation characteristics, compact packaging, and various protective features. Its application field is broad, and there are alternative models available for different needs.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של XC6108C41DGR-G בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of XC6108C41DGR-G in technical solutions:

  1. Question: What is XC6108C41DGR-G?
    - Answer: XC6108C41DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108C41DGR-G?
    - Answer: The operating voltage range of XC6108C41DGR-G is typically between 0.9V and 6.0V.

  3. Question: What is the purpose of using XC6108C41DGR-G in a technical solution?
    - Answer: XC6108C41DGR-G is commonly used to ensure proper operation of microcontrollers, digital circuits, and other electronic devices by monitoring the power supply voltage and initiating a reset if it falls below a specified level.

  4. Question: How does XC6108C41DGR-G detect the power supply voltage?
    - Answer: XC6108C41DGR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. If the input voltage drops below this threshold, it triggers the reset signal.

  5. Question: Can XC6108C41DGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108C41DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Question: What is the output type of XC6108C41DGR-G?
    - Answer: XC6108C41DGR-G has an open-drain output, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  7. Question: What is the typical reset voltage threshold of XC6108C41DGR-G?
    - Answer: The typical reset voltage threshold of XC6108C41DGR-G is 4.1V, meaning it will trigger a reset signal when the input voltage drops below this level.

  8. Question: Can XC6108C41DGR-G be used in automotive applications?
    - Answer: Yes, XC6108C41DGR-G is suitable for automotive applications as it meets the required specifications and can withstand the harsh operating conditions typically found in automotive environments.

  9. Question: Does XC6108C41DGR-G have any built-in delay for the reset signal?
    - Answer: No, XC6108C41DGR-G does not have a built-in delay for the reset signal. If a delay is required, an external delay circuit can be added.

  10. Question: Is XC6108C41DGR-G available in different package options?
    - Answer: Yes, XC6108C41DGR-G is available in various package options, such as SOT-25 and USP-6B, providing flexibility for different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.