Texas Instruments
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
UCC5641PW28
צפה בפרטים DataSheets

UCC5641PW28

Product Overview

Category

UCC5641PW28 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management applications.

Characteristics

  • UCC5641PW28 is a high-performance voltage regulator IC.
  • It offers excellent stability and efficiency in power management systems.
  • The IC operates at a wide input voltage range, making it suitable for various applications.
  • It provides precise voltage regulation and protection features.

Package

UCC5641PW28 is available in a small-sized 28-pin PowerPAD TSSOP package.

Essence

The essence of UCC5641PW28 lies in its ability to regulate and control voltages efficiently, ensuring stable power supply to electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each containing a specific quantity of ICs. The exact quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1A
  • Dropout Voltage: 200mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The UCC5641PW28 IC has a total of 28 pins, each serving a specific function. Here is a detailed pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. COMP: Compensation pin
  7. SS/TR: Soft-start/Tracking pin
  8. PGND: Power ground pin
  9. AGND: Analog ground pin
  10. NC: No connection pin
  11. NC: No connection pin
  12. NC: No connection pin
  13. NC: No connection pin
  14. NC: No connection pin
  15. NC: No connection pin
  16. NC: No connection pin
  17. NC: No connection pin
  18. NC: No connection pin
  19. NC: No connection pin
  20. NC: No connection pin
  21. NC: No connection pin
  22. NC: No connection pin
  23. NC: No connection pin
  24. NC: No connection pin
  25. NC: No connection pin
  26. NC: No connection pin
  27. NC: No connection pin
  28. NC: No connection pin

Functional Features

  • Precise voltage regulation for stable power supply.
  • Overcurrent protection to prevent damage to the IC and connected devices.
  • Thermal shutdown feature to avoid overheating.
  • Soft-start function for smooth power-up.
  • Low dropout voltage for efficient power conversion.

Advantages and Disadvantages

Advantages

  • High-performance voltage regulation.
  • Wide input voltage range.
  • Excellent stability and efficiency.
  • Compact package size.
  • Protection features ensure device safety.

Disadvantages

  • Limited maximum output current (1A).
  • Not suitable for high-power applications.

Working Principles

UCC5641PW28 operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The IC continuously monitors the input and output voltages, making necessary adjustments to ensure precise regulation.

Detailed Application Field Plans

UCC5641PW28 finds applications in various electronic devices that require efficient power management. Some of the common application fields include:

  1. Mobile devices: Smartphones, tablets, and portable media players.
  2. Consumer electronics: Digital cameras, portable gaming consoles, and audio players.
  3. Computer peripherals: USB hubs, external hard drives, and printers.
  4. Industrial equipment: Test and measurement instruments, control systems, and power supplies.

Detailed and Complete Alternative Models

  1. UCC5642PW28: Similar to UCC5641PW28 with enhanced output current capability (up to 2A).
  2. UCC5643PW28: Higher voltage range variant of UCC5641PW28 (up to 5V output).
  3. UCC5644PW28: Dual-channel version of UCC5641PW28 for applications requiring multiple outputs.

These alternative models offer similar functionality but with specific enhancements or variations to cater to different requirements.

Word count: 534 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של UCC5641PW28 בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of UCC5641PW28 in technical solutions:

Q1: What is UCC5641PW28? A1: UCC5641PW28 is a specific model of integrated circuit (IC) developed by Texas Instruments. It is a high-speed, low-power, quad-channel digital isolator.

Q2: What is the purpose of UCC5641PW28? A2: The purpose of UCC5641PW28 is to provide galvanic isolation between different parts of an electronic system, ensuring electrical safety and preventing noise interference.

Q3: What are the key features of UCC5641PW28? A3: Some key features of UCC5641PW28 include high data rates (up to 100 Mbps), low power consumption, wide temperature range (-40°C to +125°C), and compatibility with various communication protocols.

Q4: How does UCC5641PW28 achieve galvanic isolation? A4: UCC5641PW28 uses capacitive coupling and proprietary digital isolation technology to transmit signals across the isolation barrier without the need for physical connections.

Q5: What are the typical applications of UCC5641PW28? A5: UCC5641PW28 is commonly used in industrial automation, motor control systems, power converters, medical devices, and any other application where electrical isolation is required.

Q6: Can UCC5641PW28 be used in high-voltage applications? A6: Yes, UCC5641PW28 has a high withstand voltage rating of up to 5600 Vrms, making it suitable for use in high-voltage environments.

Q7: Is UCC5641PW28 compatible with different supply voltages? A7: Yes, UCC5641PW28 supports a wide range of supply voltages, typically from 2.25 V to 5.5 V, allowing it to be integrated into various systems.

Q8: Does UCC5641PW28 have built-in protection features? A8: Yes, UCC5641PW28 incorporates various protection mechanisms such as thermal shutdown, undervoltage lockout, and overcurrent protection to ensure safe operation.

Q9: Can UCC5641PW28 operate in harsh environments? A9: Yes, UCC5641PW28 is designed to withstand harsh industrial environments with its extended temperature range and robust construction.

Q10: Are there any evaluation boards or reference designs available for UCC5641PW28? A10: Yes, Texas Instruments provides evaluation boards and reference designs that can help engineers quickly prototype and integrate UCC5641PW28 into their applications.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.