Category: Integrated Circuit (IC)
Use: Power Management
Characteristics: - Low Dropout Voltage Regulator - High Output Current Capability - Adjustable Output Voltage - Thermal Shutdown Protection - Overcurrent Protection - Short-Circuit Protection
Package: SOT-23-5
Essence: The TPS2001DDBVR is a low dropout voltage regulator designed for power management applications. It provides a stable output voltage with high current capability and various protection features.
Packaging/Quantity: The TPS2001DDBVR is available in a SOT-23-5 package, which is a small surface-mount package. It is typically sold in reels or tubes containing multiple units.
The TPS2001DDBVR has the following pin configuration:
```
| | --| |-- VIN (Input Voltage) --| |-- GND (Ground) --| |-- EN (Enable) --| |-- VOUT (Output Voltage) |____| ```
Low Dropout Voltage: The TPS2001DDBVR has a low dropout voltage of only 200mV at 100mA, allowing it to regulate the output voltage even when the input voltage is close to the desired output voltage.
High Output Current Capability: With a maximum output current of 150mA, the TPS2001DDBVR can power a wide range of devices and components.
Adjustable Output Voltage: The output voltage can be adjusted from 0.8V to 5.5V, providing flexibility for different applications.
Thermal Shutdown Protection: The IC includes thermal shutdown protection, which prevents damage due to excessive temperature by shutting down the regulator temporarily.
Overcurrent Protection: The TPS2001DDBVR features overcurrent protection, safeguarding against excessive current flow that could damage the device or connected components.
Short-Circuit Protection: In case of a short circuit, the regulator automatically shuts down to protect itself and the connected circuitry.
The TPS2001DDBVR is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, adjusting the pass transistor's resistance to maintain a stable output voltage. The enable pin controls the regulator's operation, allowing it to be turned on or off as needed.
The TPS2001DDBVR is commonly used in various applications, including but not limited to:
Battery-powered devices: The low dropout voltage and adjustable output voltage make it suitable for battery-powered devices that require stable and regulated power supply.
Portable electronics: Due to its small package size and low quiescent current, the TPS2001DDBVR is ideal for portable electronic devices such as smartphones, tablets, and wearable devices.
Industrial automation: The regulator's protection features, wide input voltage range, and high output current capability make it suitable for industrial automation applications that require reliable power management.
Automotive electronics: With its ability to operate in a wide temperature range (-40°C to 125°C), the TPS2001DDBVR can be used in automotive electronics, including infotainment systems, lighting controls, and sensors.
These alternative models offer similar functionality and can be considered based on specific application requirements.
In conclusion, the TPS2001DDBVR is
Sure! Here are 10 common questions and answers related to the application of TPS2001DDBVR in technical solutions:
Q1: What is TPS2001DDBVR? A1: TPS2001DDBVR is a voltage supervisor and reset IC (Integrated Circuit) manufactured by Texas Instruments.
Q2: What is the purpose of TPS2001DDBVR? A2: The purpose of TPS2001DDBVR is to monitor the voltage level of a system and generate a reset signal when the voltage falls below a certain threshold.
Q3: What is the operating voltage range of TPS2001DDBVR? A3: TPS2001DDBVR operates within a voltage range of 1.8V to 5.5V.
Q4: Can TPS2001DDBVR be used in battery-powered applications? A4: Yes, TPS2001DDBVR can be used in battery-powered applications as it has a low quiescent current consumption.
Q5: How does TPS2001DDBVR generate a reset signal? A5: TPS2001DDBVR generates a reset signal by pulling the RESET pin low when the monitored voltage falls below the threshold.
Q6: What is the typical reset threshold voltage of TPS2001DDBVR? A6: The typical reset threshold voltage of TPS2001DDBVR is 2.93V.
Q7: Can TPS2001DDBVR be used in automotive applications? A7: Yes, TPS2001DDBVR is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q8: Does TPS2001DDBVR have any built-in delay for the reset signal? A8: Yes, TPS2001DDBVR has a fixed delay of approximately 200ms for the reset signal to ensure stable power-up.
Q9: Can TPS2001DDBVR be used in industrial control systems? A9: Yes, TPS2001DDBVR is commonly used in industrial control systems to monitor and reset microcontrollers or other critical components.
Q10: What is the package type of TPS2001DDBVR? A10: TPS2001DDBVR is available in a small SOT-23-5 package, which is suitable for space-constrained applications.
Please note that these answers are general and may vary depending on specific application requirements.