Texas Instruments
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
TAS5733LDCAR
צפה בפרטים DataSheets

TAS5733LDCAR

Product Overview

Category

TAS5733LDCAR belongs to the category of audio amplifier integrated circuits.

Use

This product is primarily used for amplifying audio signals in various electronic devices such as televisions, home theater systems, and car audio systems.

Characteristics

  • High-quality audio amplification
  • Low power consumption
  • Compact size
  • Wide operating voltage range
  • Thermal and short-circuit protection

Package

TAS5733LDCAR is available in a small outline package (SOP) which ensures easy integration into different electronic devices.

Essence

The essence of TAS5733LDCAR lies in its ability to provide efficient and high-fidelity audio amplification while consuming minimal power.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of TAS5733LDCAR integrated circuits.

Specifications

  • Power Supply Voltage: 4.5V - 26V
  • Output Power: 20W per channel (at 10% THD+N, 1kHz, 4Ω)
  • Total Harmonic Distortion + Noise (THD+N): 0.03% (at 1W, 1kHz, 4Ω)
  • Signal-to-Noise Ratio (SNR): 102dB (A-weighted)
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TAS5733LDCAR integrated circuit consists of the following pins:

  1. VDD: Power supply voltage input
  2. GND: Ground reference
  3. SD: Shutdown control pin
  4. MUTE: Mute control pin
  5. BTL_OUT1: Bridge-tied load output 1
  6. BTL_OUT2: Bridge-tied load output 2
  7. VDDP: Positive power supply voltage input for the output stage
  8. PVDD: Power supply voltage input for the internal circuitry
  9. AGND: Analog ground reference
  10. I2C_SCL: Serial clock input for I2C communication
  11. I2C_SDA: Serial data input/output for I2C communication

Functional Features

  • Built-in digital-to-analog converter (DAC)
  • I2C control interface for easy configuration
  • Short-circuit and thermal protection
  • Pop and click suppression during power-on/off transitions
  • Low idle power consumption in standby mode

Advantages and Disadvantages

Advantages

  • High-quality audio amplification with low distortion
  • Wide operating voltage range allows flexibility in various applications
  • Compact size enables integration into space-constrained devices
  • Efficient power consumption for improved energy efficiency

Disadvantages

  • Limited output power compared to higher wattage amplifiers
  • Requires additional external components for a complete audio system

Working Principles

TAS5733LDCAR operates by receiving an analog audio signal, converting it into a digital signal using the built-in DAC, and then amplifying the digital signal to drive the connected speakers. The I2C control interface allows users to configure various parameters such as volume control, equalization, and audio source selection.

Detailed Application Field Plans

TAS5733LDCAR finds application in a wide range of electronic devices, including: 1. Televisions and home theater systems 2. Car audio systems 3. Portable audio players 4. Multimedia speakers 5. Gaming consoles

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to TAS5733LDCAR are: 1. TAS5713LDCAR 2. TPA3116D2DADR 3. MAX98357AETE+T

These alternative models can be considered based on specific requirements and design constraints.

Word count: 536 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של TAS5733LDCAR בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of TAS5733LDCAR in technical solutions:

  1. Q: What is TAS5733LDCAR? A: TAS5733LDCAR is a digital input, high-performance Class-D audio amplifier that can be used in various audio applications.

  2. Q: What is the power output of TAS5733LDCAR? A: TAS5733LDCAR can deliver up to 20 watts per channel into a 4-ohm load or 10 watts per channel into an 8-ohm load.

  3. Q: Can TAS5733LDCAR be used in portable devices? A: Yes, TAS5733LDCAR is suitable for portable devices due to its low power consumption and small form factor.

  4. Q: Does TAS5733LDCAR support multiple audio inputs? A: Yes, TAS5733LDCAR supports multiple digital audio inputs such as I2S, TDM, and PDM.

  5. Q: Is TAS5733LDCAR compatible with different audio codecs? A: Yes, TAS5733LDCAR is compatible with various audio codecs including PCM, DSD, and MP3.

  6. Q: Can TAS5733LDCAR operate on a single power supply? A: Yes, TAS5733LDCAR can operate on a single power supply ranging from 4.5V to 26V.

  7. Q: Does TAS5733LDCAR have built-in protection features? A: Yes, TAS5733LDCAR includes built-in protection features like thermal shutdown, overcurrent protection, and short-circuit protection.

  8. Q: Can TAS5733LDCAR be controlled using a microcontroller? A: Yes, TAS5733LDCAR can be controlled using a microcontroller via its I2C interface.

  9. Q: Is TAS5733LDCAR suitable for automotive audio applications? A: Yes, TAS5733LDCAR is designed to meet the requirements of automotive audio systems and can operate in harsh automotive environments.

  10. Q: Are evaluation modules available for TAS5733LDCAR? A: Yes, evaluation modules are available for TAS5733LDCAR, which provide a convenient way to test and evaluate its performance in different setups.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.