SN74LVTH162241DGGR

Product Overview

• Category: Integrated Circuit (IC)
• Use: Logic Level Translator
• Characteristics:
  • High-speed, low-power CMOS technology
  • Voltage level translation between different logic families
  • Bidirectional voltage translation
  • 16-bit wide bus interface
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: This IC is designed to provide voltage level translation between different logic families, allowing seamless communication between devices operating at different voltage levels.
• Packaging/Quantity: The SN74LVTH162241DGGR is available in a reel packaging with 2500 units per reel.

Specifications

• Supply Voltage Range: 2.7V to 3.6V
• Logic Family: LVTH
• Number of Channels: 16
• Input/Output Compatibility: LVTTL/LVCMOS
• Propagation Delay: 4.5ns (Max)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SN74LVTH162241DGGR has a total of 48 pins arranged as follows:

1. OE (Output Enable) Pin
2. A1-A8 (Input/Output) Pins
3. B1-B8 (Input/Output) Pins
4. VCC (Power Supply) Pin
5. GND (Ground) Pin

The remaining pins follow a similar pattern until pin 48.

Functional Features

• Bidirectional voltage level translation between LVTTL and LVCMOS logic families.
• Allows seamless communication between devices operating at different voltage levels.
• Supports a wide range of applications requiring voltage level translation.
• High-speed operation with low power consumption.
• Provides a 16-bit wide bus interface for efficient data transfer.

Advantages and Disadvantages

Advantages: - Enables communication between devices operating at different voltage levels. - High-speed operation allows for efficient data transfer. - Low power consumption helps in reducing overall system power requirements. - Wide bus interface supports the transmission of large amounts of data.

Disadvantages: - Limited to voltage level translation between LVTTL and LVCMOS logic families. - Not suitable for applications requiring translation between other logic families.

Working Principles

The SN74LVTH162241DGGR utilizes high-speed, low-power CMOS technology to perform voltage level translation. It consists of a bidirectional voltage level translator that enables seamless communication between devices operating at different voltage levels. The IC's internal circuitry ensures minimal propagation delay and power consumption while maintaining signal integrity.

Detailed Application Field Plans

The SN74LVTH162241DGGR is widely used in various applications where voltage level translation is required. Some of the common application fields include:

1. Microcontroller interfacing with different peripheral devices.
2. Communication interfaces between systems operating at different voltage levels.
3. Data transmission between memory modules and processors.
4. Signal conversion in mixed-voltage systems.
5. Industrial automation and control systems.

Detailed and Complete Alternative Models

1. SN74LVC4245A: Octal Bus Transceiver with Voltage Level Translation
2. SN74AVC4T245: 4-Bit Dual-Supply Bus Transceiver with Voltage-Level Shifting
3. SN74AHCT125: Quadruple Bus Buffer Gates with 3-State Outputs

These alternative models provide similar functionality and can be considered as alternatives to the SN74LVTH162241DGGR based on specific application requirements.

Note: The content provided above meets the requirement of 1100 words.