The SN74LVCH8T245DBR has a total of 20 pins. The pin configuration is as follows:
Advantages: - Enables seamless integration of components with different voltage requirements - Provides bidirectional data transfer capability - Supports high-speed data transmission - Low power consumption - Compact package size
Disadvantages: - Limited to 8-bit data width - Requires careful consideration of voltage compatibility between systems
The SN74LVCH8T245DBR is a bidirectional level shifter and bus transceiver. It allows for the translation of signals between two voltage domains, enabling communication between devices operating at different voltage levels. The device uses a combination of voltage level shifters and transceivers to ensure proper signal transfer.
When the OE (Output Enable) pin is low, the device is enabled, and data can be transferred bidirectionally between the input/output pins. The A pins control the direction of data flow for each channel. When A is low, data flows from the B side to the A side, and when A is high, data flows from the A side to the B side.
The SN74LVCH8T245DBR operates within a specified supply voltage range and provides reliable data transfer with minimal delay.
The SN74LVCH8T245DBR is commonly used in various applications where voltage level shifting and bidirectional data transfer are required. Some of the application fields include:
Sure! Here are 10 common questions and answers related to the application of SN74LVCH8T245DBR in technical solutions:
Q: What is SN74LVCH8T245DBR? A: SN74LVCH8T245DBR is a high-performance octal bus transceiver with 3-state outputs, designed for voltage translation between different logic levels.
Q: What is the operating voltage range of SN74LVCH8T245DBR? A: SN74LVCH8T245DBR operates within a voltage range of 1.65V to 5.5V.
Q: How many channels does SN74LVCH8T245DBR have? A: SN74LVCH8T245DBR has 8 bidirectional channels.
Q: What is the maximum data transfer rate supported by SN74LVCH8T245DBR? A: SN74LVCH8T245DBR supports data transfer rates up to 400 Mbps.
Q: Can SN74LVCH8T245DBR be used for level shifting between different voltage domains? A: Yes, SN74LVCH8T245DBR can be used for level shifting between different voltage domains, making it suitable for interfacing between devices operating at different logic levels.
Q: Does SN74LVCH8T245DBR support 3-state outputs? A: Yes, SN74LVCH8T245DBR supports 3-state outputs, allowing multiple devices to share a common bus without interfering with each other.
Q: What is the maximum output current that SN74LVCH8T245DBR can drive? A: SN74LVCH8T245DBR can drive up to 32 mA of output current.
Q: Can SN74LVCH8T245DBR be used in both parallel and serial data transfer applications? A: Yes, SN74LVCH8T245DBR can be used in both parallel and serial data transfer applications, depending on the configuration and connection.
Q: Is SN74LVCH8T245DBR compatible with other logic families? A: Yes, SN74LVCH8T245DBR is compatible with a wide range of logic families, including TTL, CMOS, and LVCMOS.
Q: What is the package type of SN74LVCH8T245DBR? A: SN74LVCH8T245DBR is available in a small-outline integrated circuit (SOIC) package.