Texas Instruments
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
SN74CBTD16211DGGR
צפה בפרטים DataSheets

SN74CBTD16211DGGR

Product Overview

  • Category: Integrated Circuit
  • Use: Digital Multiplexer/Demultiplexer
  • Characteristics: High-speed, low-power, bidirectional signal switching
  • Package: TSSOP-56
  • Essence: 16-bit bus switch with 3-state outputs
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Number of Channels: 16
  • Input Voltage Range: -0.5V to 7V
  • Output Voltage Range: -0.5V to 7V
  • On-State Resistance: 5Ω (typical)
  • Supply Voltage Range: 2V to 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. OE (Output Enable) 1
  2. I/O0 (Bidirectional Data I/O) 1
  3. I/O1 (Bidirectional Data I/O) 1
  4. GND (Ground)
  5. I/O2 (Bidirectional Data I/O) 1
  6. I/O3 (Bidirectional Data I/O) 1
  7. VCC (Supply Voltage)
  8. I/O4 (Bidirectional Data I/O) 1
  9. I/O5 (Bidirectional Data I/O) 1
  10. I/O6 (Bidirectional Data I/O) 1
  11. I/O7 (Bidirectional Data I/O) 1
  12. I/O8 (Bidirectional Data I/O) 1
  13. I/O9 (Bidirectional Data I/O) 1
  14. I/O10 (Bidirectional Data I/O) 1
  15. I/O11 (Bidirectional Data I/O) 1
  16. I/O12 (Bidirectional Data I/O) 1
  17. I/O13 (Bidirectional Data I/O) 1
  18. I/O14 (Bidirectional Data I/O) 1
  19. I/O15 (Bidirectional Data I/O) 1
  20. VCC (Supply Voltage)
  21. GND (Ground)
  22. OE (Output Enable) 2
  23. I/O0 (Bidirectional Data I/O) 2
  24. I/O1 (Bidirectional Data I/O) 2
  25. GND (Ground)
  26. I/O2 (Bidirectional Data I/O) 2
  27. I/O3 (Bidirectional Data I/O) 2
  28. VCC (Supply Voltage)
  29. I/O4 (Bidirectional Data I/O) 2
  30. I/O5 (Bidirectional Data I/O) 2
  31. I/O6 (Bidirectional Data I/O) 2
  32. I/O7 (Bidirectional Data I/O) 2
  33. I/O8 (Bidirectional Data I/O) 2
  34. I/O9 (Bidirectional Data I/O) 2
  35. I/O10 (Bidirectional Data I/O) 2
  36. I/O11 (Bidirectional Data I/O) 2
  37. I/O12 (Bidirectional Data I/O) 2
  38. I/O13 (Bidirectional Data I/O) 2
  39. I/O14 (Bidirectional Data I/O) 2
  40. I/O15 (Bidirectional Data I/O) 2
  41. VCC (Supply Voltage)
  42. GND (Ground)
  43. OE (Output Enable) 3
  44. I/O0 (Bidirectional Data I/O) 3
  45. I/O1 (Bidirectional Data I/O) 3
  46. GND (Ground)
  47. I/O2 (Bidirectional Data I/O) 3
  48. I/O3 (Bidirectional Data I/O) 3
  49. VCC (Supply Voltage)
  50. I/O4 (Bidirectional Data I/O) 3
  51. I/O5 (Bidirectional Data I/O) 3
  52. I/O6 (Bidirectional Data I/O) 3
  53. I/O7 (Bidirectional Data I/O) 3
  54. I/O8 (Bidirectional Data I/O) 3
  55. I/O9 (Bidirectional Data I/O) 3
  56. I/O10 (Bidirectional Data I/O) 3

Functional Features

  • Bidirectional signal switching between multiple channels
  • High-speed operation for efficient data transfer
  • Low-power consumption for energy efficiency
  • 3-state outputs allow for bus sharing and isolation
  • Wide operating voltage range for compatibility with various systems

Advantages

  • Enables efficient multiplexing and demultiplexing of digital signals
  • Supports high-speed data transmission

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של SN74CBTD16211DGGR בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of SN74CBTD16211DGGR:

  1. Q: What is SN74CBTD16211DGGR? A: SN74CBTD16211DGGR is a digital multiplexer/demultiplexer IC (Integrated Circuit) manufactured by Texas Instruments.

  2. Q: What is the purpose of SN74CBTD16211DGGR? A: SN74CBTD16211DGGR is used for signal routing and level shifting in various technical solutions.

  3. Q: What voltage levels does SN74CBTD16211DGGR support? A: SN74CBTD16211DGGR supports voltage levels ranging from 1.65V to 3.6V.

  4. Q: How many channels does SN74CBTD16211DGGR have? A: SN74CBTD16211DGGR has 24 channels, which can be configured as either multiplexers or demultiplexers.

  5. Q: What is the maximum data rate supported by SN74CBTD16211DGGR? A: SN74CBTD16211DGGR supports a maximum data rate of 400 Mbps.

  6. Q: Can SN74CBTD16211DGGR handle bidirectional signals? A: Yes, SN74CBTD16211DGGR can handle bidirectional signals, making it suitable for applications requiring both input and output functionality.

  7. Q: Does SN74CBTD16211DGGR have any built-in protection features? A: Yes, SN74CBTD16211DGGR has built-in ESD (Electrostatic Discharge) protection on all pins.

  8. Q: What is the power supply voltage range for SN74CBTD16211DGGR? A: SN74CBTD16211DGGR operates with a power supply voltage range of 1.2V to 3.6V.

  9. Q: Can SN74CBTD16211DGGR be used in high-speed applications? A: Yes, SN74CBTD16211DGGR is designed for high-speed operation and can be used in applications requiring fast data transmission.

  10. Q: What package does SN74CBTD16211DGGR come in? A: SN74CBTD16211DGGR is available in a TSSOP (Thin Shrink Small Outline Package) package with 56 pins.

Please note that these answers are general and may vary depending on the specific application and requirements.