SN74AUP2G126YFPR

Product Overview

Category

SN74AUP2G126YFPR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal switching applications.

Characteristics

• Low power consumption
• High-speed operation
• Wide operating voltage range
• Small package size

Package

SN74AUP2G126YFPR is available in a small footprint package, such as a flip-chip package or a leadless package.

Essence

The essence of SN74AUP2G126YFPR lies in its ability to efficiently switch signals while consuming minimal power.

Packaging/Quantity

SN74AUP2G126YFPR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Supply Voltage: 1.65V to 3.6V
• Operating Temperature Range: -40°C to +85°C
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Maximum Propagation Delay: 4.5ns

Detailed Pin Configuration

SN74AUP2G126YFPR has the following pin configuration:

___________ | | 1A |1 8| VCC 1B |2 7| 2Y GND|3 6| 2A 1Y |4 5| 2B |___________|

Functional Features

• Dual independent channels
• Non-inverting buffer
• High-speed switching capability
• Low input/output capacitance

Advantages and Disadvantages

Advantages

• Low power consumption
• High-speed operation
• Wide operating voltage range
• Small package size

Disadvantages

• Limited number of channels (dual channel only)
• May not be suitable for high-power applications

Working Principles

SN74AUP2G126YFPR operates by receiving input signals on the 1A and 1B pins, and providing the corresponding output signals on the 1Y pin. The same principle applies to the 2A, 2B, and 2Y pins. The IC uses internal circuitry to switch the signals with minimal delay and power consumption.

Detailed Application Field Plans

SN74AUP2G126YFPR finds applications in various fields, including:

1. Consumer electronics: Used in smartphones, tablets, and portable devices for signal switching.
2. Automotive: Employed in vehicle control systems for signal routing and switching.
3. Industrial automation: Utilized in control panels and PLCs for signal management.
4. Communication systems: Integrated into networking equipment for signal routing and distribution.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SN74AUP2G126YFPR are:

1. SN74LVC2G126: Similar functionality but operates at a different voltage range.
2. SN74HC2G126: Higher voltage tolerance but may consume more power.
3. SN74LV2G126: Lower power consumption but operates at a lower voltage range.

These alternative models provide similar signal switching capabilities but may have slight differences in characteristics and specifications.

Word count: 446 words