Texas Instruments
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
DS90LV004TVS
צפה בפרטים DataSheets

DS90LV004TVS

Product Overview

  • Category: Integrated Circuit
  • Use: High-speed LVDS Serializer/Deserializer
  • Characteristics: Low-voltage differential signaling, high-speed data transmission, compact package, reliable performance
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: DS90LV004TVS is a high-performance IC designed for transmitting and receiving high-speed digital data using Low-Voltage Differential Signaling (LVDS) technology.
  • Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel.

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 4
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Impedance: 100Ω
  • Package Type: SOIC-16

Detailed Pin Configuration

The DS90LV004TVS has a total of 16 pins, which are assigned as follows:

  1. VCC
  2. GND
  3. IN0-
  4. IN0+
  5. OUT0+
  6. OUT0-
  7. IN1-
  8. IN1+
  9. OUT1+
  10. OUT1-
  11. IN2-
  12. IN2+
  13. OUT2+
  14. OUT2-
  15. IN3-
  16. IN3+

Functional Features

  • Supports high-speed data transmission up to 400 Mbps.
  • Provides low-voltage differential signaling for noise immunity and reduced EMI.
  • Offers four independent channels for simultaneous data transmission and reception.
  • Compact SOIC package allows for easy integration into various electronic systems.
  • Designed for reliable performance in harsh operating conditions.

Advantages and Disadvantages

Advantages: - High-speed data transmission capability. - Low-voltage differential signaling for noise immunity. - Compact package for easy integration. - Reliable performance in harsh conditions.

Disadvantages: - Limited number of channels (4). - Requires LVDS-compatible devices for proper operation.

Working Principles

The DS90LV004TVS operates based on the principles of Low-Voltage Differential Signaling (LVDS). It uses a differential voltage swing to transmit digital data over long distances while minimizing noise interference. The IC converts parallel data into serial LVDS signals for transmission and vice versa for reception. This differential signaling technique provides high-speed, low-power, and noise-immune data communication.

Detailed Application Field Plans

The DS90LV004TVS is commonly used in various applications that require high-speed data transmission with noise immunity. Some typical application fields include:

  1. High-speed data communication systems
  2. Industrial automation and control systems
  3. Medical imaging equipment
  4. Automotive electronics
  5. Test and measurement instruments

Detailed and Complete Alternative Models

  1. SN65LVDS4: Similar LVDS Serializer/Deserializer IC with 4 channels.
  2. MAX9124: Quad LVDS Line Driver and Receiver IC.
  3. DS90LV011A: Single LVDS Line Driver and Receiver IC.

These alternative models offer similar functionality and can be considered as alternatives to the DS90LV004TVS depending on specific requirements.

Word count: 369 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של DS90LV004TVS בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of DS90LV004TVS in technical solutions:

  1. Q: What is DS90LV004TVS? A: DS90LV004TVS is a quad LVDS (Low Voltage Differential Signaling) driver/receiver designed for high-speed data transmission over long distances.

  2. Q: What is the maximum data rate supported by DS90LV004TVS? A: DS90LV004TVS supports a maximum data rate of 400 Mbps per channel, making it suitable for high-speed applications.

  3. Q: Can DS90LV004TVS be used for point-to-point communication? A: Yes, DS90LV004TVS can be used for point-to-point communication as well as multi-drop bus applications.

  4. Q: What is the operating voltage range of DS90LV004TVS? A: DS90LV004TVS operates from a supply voltage range of 3V to 3.6V.

  5. Q: Does DS90LV004TVS support hot-plugging capability? A: Yes, DS90LV004TVS supports hot-plugging, allowing for easy connection and disconnection of devices without disrupting the system.

  6. Q: Can DS90LV004TVS be used in industrial environments? A: Yes, DS90LV004TVS is designed to operate reliably in industrial environments with extended temperature ranges and robust ESD protection.

  7. Q: How many channels does DS90LV004TVS have? A: DS90LV004TVS has four independent channels, allowing for simultaneous transmission and reception of data.

  8. Q: What is the typical propagation delay of DS90LV004TVS? A: The typical propagation delay of DS90LV004TVS is around 1.5 ns, ensuring minimal signal delay in high-speed applications.

  9. Q: Can DS90LV004TVS be used for long-distance data transmission? A: Yes, DS90LV004TVS is specifically designed for long-distance data transmission, with support for cable lengths of up to several meters.

  10. Q: What are some typical applications of DS90LV004TVS? A: DS90LV004TVS is commonly used in applications such as video surveillance systems, automotive infotainment, medical imaging, and industrial control systems.

Please note that these answers are general and may vary depending on the specific requirements and use cases.