Texas Instruments
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
CY74FCT16501ATPVCT
צפה בפרטים DataSheets

CY74FCT16501ATPVCT

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Data storage and transfer
  • Characteristics: High-speed, low-power consumption
  • Package: 48-pin Thin Quad Flat Pack (TQFP)
  • Essence: 16-bit universal bus transceiver
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Logic Family: FCT
  • Number of Bits: 16
  • Input/Output Type: Tri-state
  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 3.5ns (typical)
  • Output Drive Capability: ±24mA

Detailed Pin Configuration

  1. A1: Data Input/Output 1
  2. B1: Data Input/Output 2
  3. Y1: Data Output 1
  4. GND: Ground
  5. Y2: Data Output 2
  6. B2: Data Input/Output 3
  7. A2: Data Input/Output 4
  8. VCC: Power Supply
  9. A3: Data Input/Output 5
  10. B3: Data Input/Output 6
  11. Y3: Data Output 3
  12. GND: Ground
  13. Y4: Data Output 4
  14. B4: Data Input/Output 7
  15. A4: Data Input/Output 8
  16. OE: Output Enable
  17. A5: Data Input/Output 9
  18. B5: Data Input/Output 10
  19. Y5: Data Output 5
  20. GND: Ground
  21. Y6: Data Output 6
  22. B6: Data Input/Output 11
  23. A6: Data Input/Output 12
  24. VCC: Power Supply
  25. A7: Data Input/Output 13
  26. B7: Data Input/Output 14
  27. Y7: Data Output 7
  28. GND: Ground
  29. Y8: Data Output 8
  30. B8: Data Input/Output 15
  31. A8: Data Input/Output 16
  32. OE: Output Enable
  33. A9: Data Input/Output 17
  34. B9: Data Input/Output 18
  35. Y9: Data Output 9
  36. GND: Ground
  37. Y10: Data Output 10
  38. B10: Data Input/Output 19
  39. A10: Data Input/Output 20
  40. VCC: Power Supply
  41. A11: Data Input/Output 21
  42. B11: Data Input/Output 22
  43. Y11: Data Output 11
  44. GND: Ground
  45. Y12: Data Output 12
  46. B12: Data Input/Output 23
  47. A12: Data Input/Output 24
  48. OE: Output Enable

Functional Features

  • Bidirectional data transfer between two independent buses
  • Tri-state outputs allow multiple devices to share the same bus
  • High-speed operation with low power consumption
  • ESD protection on all inputs and outputs
  • Non-inverting outputs for better signal integrity

Advantages

  • Versatile universal bus transceiver suitable for various applications
  • High-speed operation enables efficient data transfer
  • Low power consumption helps in reducing energy usage
  • ESD protection ensures reliability in harsh environments
  • Tri-state outputs allow for bus sharing and system flexibility

Disadvantages

  • Limited to 16-bit data transfer, may not be suitable for larger data sizes
  • Requires careful handling due to sensitivity to electrostatic discharge (ESD)
  • Availability and pricing may vary based on market demand

Working Principles

The CY74FCT16501ATPVCT is a 16-bit universal bus transceiver that enables bidirectional data transfer between two independent buses. It operates by receiving data from one bus and transmitting it to the other bus, or vice versa. The tri-state outputs allow multiple devices to share the same bus without interfering with each other. The IC operates at high speeds while consuming low power, making it suitable for various applications.

Detailed Application Field Plans

The CY74FCT16501ATPVCT can be used in a wide range of applications, including: 1. Data communication systems 2. Networking equipment 3. Industrial automation 4. Automotive electronics 5. Medical devices 6. Consumer electronics

Detailed and Complete Alternative Models

  1. SN74FCT16501ATPAG - Texas Instruments
  2. MC74

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של CY74FCT16501ATPVCT בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of CY74FCT16501ATPVCT in technical solutions:

  1. Q: What is the CY74FCT16501ATPVCT? A: The CY74FCT16501ATPVCT is a 16-bit universal bus transceiver with 3-state outputs, designed for high-speed applications.

  2. Q: What is the maximum operating frequency of the CY74FCT16501ATPVCT? A: The maximum operating frequency of the CY74FCT16501ATPVCT is typically around 200 MHz.

  3. Q: What voltage levels does the CY74FCT16501ATPVCT support? A: The CY74FCT16501ATPVCT supports both TTL (5V) and CMOS (3.3V) voltage levels.

  4. Q: Can the CY74FCT16501ATPVCT be used as a bidirectional buffer? A: Yes, the CY74FCT16501ATPVCT can be used as a bidirectional buffer, allowing data to flow in both directions.

  5. Q: What is the output drive strength of the CY74FCT16501ATPVCT? A: The CY74FCT16501ATPVCT has a typical output drive strength of ±24 mA.

  6. Q: Does the CY74FCT16501ATPVCT have built-in ESD protection? A: Yes, the CY74FCT16501ATPVCT has built-in ESD protection, making it more robust against electrostatic discharge.

  7. Q: Can the CY74FCT16501ATPVCT be used in hot-swappable applications? A: Yes, the CY74FCT16501ATPVCT is designed to support hot-swappable applications, allowing for easy insertion and removal of the device.

  8. Q: What is the power supply voltage range for the CY74FCT16501ATPVCT? A: The power supply voltage range for the CY74FCT16501ATPVCT is typically between 4.5V and 5.5V.

  9. Q: Does the CY74FCT16501ATPVCT have internal pull-up or pull-down resistors? A: No, the CY74FCT16501ATPVCT does not have internal pull-up or pull-down resistors. External resistors may be required for proper operation.

  10. Q: Can the CY74FCT16501ATPVCT be used in automotive applications? A: Yes, the CY74FCT16501ATPVCT is qualified for automotive applications and meets the necessary standards for automotive electronics.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.