Texas Instruments
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
CD4052BM96G3
צפה בפרטים DataSheets

CD4052BM96G3

Product Overview

  • Category: Integrated Circuit
  • Use: Analog Multiplexer/Demultiplexer
  • Characteristics: High-speed, low-power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: A multiplexer/demultiplexer IC that allows for the selection of one of four analog or digital input signals and routing it to a single output line.
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 3V to 18V
  • On-State Resistance: 125Ω (typical)
  • On-State Switching Time: 250ns (typical)
  • Operating Temperature Range: -55°C to +125°C

Detailed Pin Configuration

The CD4052BM96G3 has a total of 16 pins. The pin configuration is as follows:

  1. INHIBIT (INH)
  2. SELECT (SEL)
  3. COMMON (COM)
  4. INPUT/OUTPUT 1 (I/O1)
  5. INPUT/OUTPUT 2 (I/O2)
  6. INPUT/OUTPUT 3 (I/O3)
  7. INPUT/OUTPUT 4 (I/O4)
  8. VEE (Negative Supply Voltage)
  9. VSS (Ground)
  10. VDD (Positive Supply Voltage)
  11. OUTPUT ENABLE (OE)
  12. NC (No Connection)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. NC (No Connection)

Functional Features

  • Low "ON" resistance and "OFF" leakage current ensure minimal signal distortion.
  • Wide supply voltage range allows for compatibility with various systems.
  • High-speed switching capability enables efficient signal routing.
  • Built-in protection diodes prevent damage from overvoltage conditions.

Advantages and Disadvantages

Advantages: - High-speed operation - Low power consumption - Wide supply voltage range - Compact package size

Disadvantages: - Limited number of input/output channels (4 in this case) - Not suitable for high-frequency applications

Working Principles

The CD4052BM96G3 is based on the principle of analog multiplexing and demultiplexing. It utilizes a combination of electronic switches to route one of the multiple input signals to a single output line. The selection of the desired input signal is controlled by the SELECT (SEL) pin, while the INHIBIT (INH) pin disables the switching function.

Detailed Application Field Plans

The CD4052BM96G3 finds application in various fields, including:

  1. Audio and Video Signal Routing: It can be used in audio/video equipment to switch between different input sources.
  2. Data Acquisition Systems: It enables the selection of specific analog or digital signals for processing and analysis.
  3. Communication Systems: It facilitates signal routing in communication devices such as modems and routers.
  4. Industrial Automation: It plays a crucial role in controlling and monitoring different sensors and actuators.

Detailed and Complete Alternative Models

  1. CD4051BM96G3: 8-channel analog multiplexer/demultiplexer with similar characteristics.
  2. CD4053BM96G3: 2-channel analog multiplexer/demultiplexer with similar characteristics.
  3. CD4067BM96G3: 16-channel analog multiplexer/demultiplexer with extended channel capacity.

These alternative models provide options with varying numbers of input/output channels to suit different application requirements.

Word count: 314 words

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של CD4052BM96G3 בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of CD4052BM96G3 in technical solutions:

  1. Q: What is CD4052BM96G3? A: CD4052BM96G3 is a multiplexer/demultiplexer integrated circuit (IC) that can be used for analog or digital signal switching.

  2. Q: What is the purpose of CD4052BM96G3? A: The purpose of CD4052BM96G3 is to route signals from multiple input sources to a single output or vice versa, depending on its configuration.

  3. Q: How many channels does CD4052BM96G3 have? A: CD4052BM96G3 has two independent channels, allowing it to switch between two different input/output paths.

  4. Q: What is the voltage range supported by CD4052BM96G3? A: CD4052BM96G3 supports a wide voltage range, typically from -5V to +20V, making it suitable for various applications.

  5. Q: Can CD4052BM96G3 handle both analog and digital signals? A: Yes, CD4052BM96G3 is designed to handle both analog and digital signals, making it versatile for different types of circuits.

  6. Q: How is CD4052BM96G3 controlled? A: CD4052BM96G3 is controlled using control pins, which allow you to select the desired input/output channel.

  7. Q: What is the maximum frequency that CD4052BM96G3 can handle? A: CD4052BM96G3 can handle frequencies up to several megahertz, making it suitable for most audio and low-frequency applications.

  8. Q: Can CD4052BM96G3 be used in battery-powered applications? A: Yes, CD4052BM96G3 has a low power consumption and can be used in battery-powered applications without significant impact on battery life.

  9. Q: Are there any limitations to the current handling capability of CD4052BM96G3? A: CD4052BM96G3 has a maximum current handling capability of around 100mA, so it may not be suitable for high-power applications.

  10. Q: Can CD4052BM96G3 be cascaded to increase the number of channels? A: Yes, multiple CD4052BM96G3 ICs can be cascaded together to increase the number of channels and expand the switching capabilities.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.