התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
VN5160STR-E

VN5160STR-E

Product Overview

Category

The VN5160STR-E belongs to the category of automotive-grade high-side smart power switches.

Use

This product is primarily used in automotive applications for controlling various loads, such as lamps, motors, and solenoids.

Characteristics

  • Automotive-grade: Designed to meet the stringent requirements of the automotive industry.
  • High-side switch: Controls the power supply to the load on the high side.
  • Smart functionality: Incorporates intelligent features for enhanced performance and protection.
  • Compact package: The VN5160STR-E is available in a small surface-mount package, making it suitable for space-constrained applications.
  • Robustness: Built to withstand harsh automotive environments, including temperature variations, voltage transients, and electromagnetic interference.
  • Packaging/Quantity: The VN5160STR-E is typically supplied in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

  • Supply voltage range: 5.5V to 34V
  • Output current capability: Up to 2A
  • On-state resistance: Typically 100mΩ
  • Operating temperature range: -40°C to +150°C
  • Protection features: Overtemperature shutdown, overcurrent protection, and short-circuit protection

Detailed Pin Configuration

The VN5160STR-E features a compact 8-pin surface-mount package with the following pin configuration:

  1. IN: Input control signal
  2. GND: Ground reference
  3. OUT: Output to the load
  4. VCC: Power supply voltage
  5. EN: Enable pin for turning the switch on/off
  6. DIAG: Diagnostic output pin
  7. NC: No connection
  8. PGND: Power ground reference

Functional Features

  • Overtemperature shutdown: Protects the device from excessive heat by shutting down the switch when the temperature exceeds a certain threshold.
  • Overcurrent protection: Safeguards the load and the switch by limiting the current to a safe level in case of a fault or short circuit.
  • Short-circuit protection: Detects and responds to short circuits by quickly turning off the switch to prevent damage.

Advantages and Disadvantages

Advantages: - Automotive-grade reliability ensures optimal performance in demanding environments. - Smart features provide enhanced functionality and protection. - Compact package allows for easy integration into space-constrained applications.

Disadvantages: - Limited output current capability compared to some other high-side switches. - Higher cost compared to non-automotive-grade alternatives.

Working Principles

The VN5160STR-E operates as a high-side switch by controlling the power supply to the load. It utilizes internal circuitry to monitor the input control signal and enable/disable the switch accordingly. The device incorporates various protection mechanisms, such as overtemperature shutdown, overcurrent protection, and short-circuit protection, to ensure safe and reliable operation.

Detailed Application Field Plans

The VN5160STR-E finds extensive use in automotive applications, including but not limited to: - Lighting systems: Controlling headlights, taillights, and interior lighting. - Motor control: Managing window motors, wiper motors, and HVAC blowers. - Solenoid control: Operating door locks, fuel injectors, and transmission solenoids. - Power distribution: Switching power to various subsystems within the vehicle.

Detailed and Complete Alternative Models

  1. VN5160S-E: Similar to the VN5160STR-E but with a different package (TO-263) and no diagnostic output pin.
  2. VN5160A-E: A variant with extended temperature range (-40°C to +175°C) for more extreme operating conditions.
  3. VN5160TRE: Another alternative with a different package (DPAK) and lower on-state resistance for higher current applications.

Note: This is not an exhaustive list, and there may be other alternative models available from the manufacturer or other suppliers.

In conclusion, the VN5160STR-E is an automotive-grade high-side smart power switch that offers compactness, reliability, and intelligent features. Its application in various automotive systems makes it a valuable component in modern vehicles.

Word count: 550

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של VN5160STR-E בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of VN5160STR-E in technical solutions:

  1. Q: What is the VN5160STR-E? A: The VN5160STR-E is a high-side driver IC designed for automotive applications, specifically for driving resistive, capacitive, and inductive loads.

  2. Q: What are the key features of the VN5160STR-E? A: The key features of the VN5160STR-E include over-temperature protection, short-circuit protection, under-voltage lockout, and diagnostic feedback.

  3. Q: Can the VN5160STR-E be used in non-automotive applications? A: Yes, while it is primarily designed for automotive applications, the VN5160STR-E can also be used in various non-automotive technical solutions that require high-side switching.

  4. Q: What is the maximum load current that the VN5160STR-E can handle? A: The VN5160STR-E can handle a maximum load current of 5A.

  5. Q: Does the VN5160STR-E support PWM (Pulse Width Modulation) control? A: Yes, the VN5160STR-E supports PWM control, allowing precise control of the load current.

  6. Q: Can the VN5160STR-E operate in harsh environments? A: Yes, the VN5160STR-E is designed to operate in harsh automotive environments, with a wide temperature range and robust protection features.

  7. Q: What is the input voltage range of the VN5160STR-E? A: The input voltage range of the VN5160STR-E is from 4.5V to 36V.

  8. Q: Is the VN5160STR-E compatible with microcontrollers and other control systems? A: Yes, the VN5160STR-E can be easily controlled by microcontrollers and other control systems through its input pins.

  9. Q: Does the VN5160STR-E have built-in diagnostics for load status monitoring? A: Yes, the VN5160STR-E has built-in diagnostics that provide feedback on the load status, such as open-load detection and short-circuit detection.

  10. Q: Are there any application notes or reference designs available for the VN5160STR-E? A: Yes, STMicroelectronics provides application notes and reference designs that can help in implementing the VN5160STR-E in various technical solutions. These resources can be found on their official website.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.