STMicroelectronics
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
TSV522AIST
צפה בפרטים DataSheets

TSV522AIST

Introduction

TSV522AIST is a versatile integrated circuit that belongs to the category of operational amplifiers. This component is widely used in various electronic applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Operational Amplifier
  • Use: Signal processing, amplification, filtering
  • Characteristics: High gain, low offset voltage, wide bandwidth
  • Package: Small outline package (SO-8)
  • Essence: Precision signal amplification and processing
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: ±1.5 V to ±18 V
  • Input Offset Voltage: 500 µV max
  • Gain Bandwidth Product: 10 MHz
  • Slew Rate: 3 V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TSV522AIST has a standard SO-8 pin configuration: 1. Non-inverting input (+IN) 2. Inverting input (-IN) 3. Negative power supply (-Vcc) 4. Ground (GND) 5. Offset null 6. Output (OUT) 7. Positive power supply (+Vcc) 8. Not connected (NC)

Functional Features

  • High precision amplification
  • Low noise and distortion
  • Rail-to-rail output swing
  • ESD protection

Advantages and Disadvantages

Advantages

  • Wide operating voltage range
  • High gain bandwidth product
  • Small form factor
  • Enhanced ESD protection

Disadvantages

  • Limited output current capability
  • Sensitive to external noise and interference

Working Principles

The TSV522AIST operates based on the principles of differential amplification and feedback control. It amplifies the voltage difference between its inputs while maintaining high precision and stability.

Detailed Application Field Plans

This operational amplifier is commonly used in: - Instrumentation amplifiers - Active filters - Sensor signal conditioning - Data acquisition systems - Audio preamplifiers

Detailed and Complete Alternative Models

  • TSV521AIST: Single-channel version
  • TSV524AIST: Quad-channel version
  • LM358: General-purpose operational amplifier
  • AD822: Precision instrumentation amplifier

In conclusion, the TSV522AIST is a highly reliable and versatile operational amplifier that finds extensive use in precision signal processing and amplification applications.

[Word Count: 324]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של TSV522AIST בפתרונות טכניים

  1. What is TSV522AIST?

    • TSV522AIST is a high-speed dual operational amplifier designed for applications requiring wide bandwidth and high slew rate.

  2. What are the key features of TSV522AIST?

    • The key features include a wide bandwidth of 10 MHz, low input bias current, low offset voltage, and high slew rate.

  3. What are the typical applications of TSV522AIST?

    • Typical applications include active filters, integrators, photodiode amplifiers, and high-frequency signal processing.

  4. What is the supply voltage range for TSV522AIST?

    • The supply voltage range is from ±2.25V to ±18V.

  5. What is the input offset voltage of TSV522AIST?

    • The input offset voltage is typically 0.5 mV.

  6. What is the input bias current of TSV522AIST?

    • The input bias current is typically 1 pA.

  7. What is the common-mode rejection ratio (CMRR) of TSV522AIST?

    • The CMRR is typically 100 dB.

  8. What is the temperature range for TSV522AIST?

    • The operating temperature range is from -40°C to 125°C.

  9. Does TSV522AIST have short-circuit protection?

    • Yes, TSV522AIST has built-in short-circuit protection.

  10. Is TSV522AIST available in a surface-mount package?

    • Yes, TSV522AIST is available in a small outline package (SO-8).