התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
M95128-DRMN8TP/K

M95128-DRMN8TP/K

Product Overview

Category

M95128-DRMN8TP/K belongs to the category of non-volatile memory integrated circuits.

Use

This product is primarily used for data storage in various electronic devices such as microcontrollers, automotive systems, and consumer electronics.

Characteristics

  • Non-volatile: The M95128-DRMN8TP/K retains stored data even when power is disconnected.
  • High capacity: It offers a storage capacity of 128 kilobits (16 kilobytes).
  • Low power consumption: The product operates on low power, making it suitable for battery-powered devices.
  • Fast access time: It provides quick read and write operations, ensuring efficient data handling.
  • Wide temperature range: The M95128-DRMN8TP/K can operate reliably across a wide temperature range, making it suitable for various environments.

Package

The M95128-DRMN8TP/K is available in an 8-pin Dual Row Mini Small Outline package (DRMN8TP/K).

Essence

This product is essential for storing critical data in electronic devices, ensuring data integrity and reliability.

Packaging/Quantity

The M95128-DRMN8TP/K is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Memory Capacity: 128 kilobits (16 kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Supply Voltage: 1.8V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 200 years
  • Endurance: 4 million write cycles

Detailed Pin Configuration

The M95128-DRMN8TP/K has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input/Output (SI/O)
  4. Write Protect (/WP)
  5. Ground (GND)
  6. VCC Supply Voltage
  7. Not Connected (NC)
  8. Serial Data Out (SO)

Functional Features

  • High-speed data transfer: The M95128-DRMN8TP/K supports fast serial communication, enabling quick data transfer between the memory and the host device.
  • Write protection: The /WP pin allows users to protect the stored data from accidental modification or erasure.
  • Flexible voltage range: The product can operate within a wide supply voltage range, providing compatibility with various systems.
  • Multiple erase/write cycles: The M95128-DRMN8TP/K offers a high endurance of 4 million write cycles, ensuring long-term reliability.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity for efficient data handling.
  • Low power consumption extends battery life in portable devices.
  • Wide temperature range enables reliable operation in diverse environments.
  • Fast access time enhances overall system performance.

Disadvantages

  • Limited storage capacity compared to higher-capacity memory options.
  • Relatively small package size may require additional space considerations in certain applications.

Working Principles

The M95128-DRMN8TP/K utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells that retain information even when power is disconnected. The SPI interface allows for high-speed data transfer between the memory and the host, enabling efficient read and write operations.

Detailed Application Field Plans

The M95128-DRMN8TP/K finds application in various fields, including: 1. Microcontrollers: Used for program storage and data logging. 2. Automotive Systems: Employed for storing vehicle parameters, firmware updates, and event logging. 3. Consumer Electronics: Utilized in devices such as smartwatches, digital cameras, and home automation systems for data storage.

Detailed and Complete Alternative Models

  1. M95080-DRMN8TP/K: 8 kilobits (1 kilobyte) non-volatile memory with similar characteristics and package.
  2. M95320-DRMN8TP/K: 32 kilobits (4 kilobytes) non-volatile memory with similar characteristics and package.
  3. M95640-DRMN8TP/K: 64 kilobits (8 kilobytes) non-volatile memory with similar characteristics and package.

(Note: The above alternative models are suggestions and may vary based on specific requirements and availability.)

In conclusion, the M95128-DRMN8TP/K is a non-volatile memory integrated circuit that offers high capacity, low power consumption, and fast access time. It finds application in various electronic devices and provides reliable data storage.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של M95128-DRMN8TP/K בפתרונות טכניים

  1. What is the storage capacity of M95128-DRMN8TP/K?
    - The storage capacity of M95128-DRMN8TP/K is 128 Kbits.

  2. What is the operating voltage range for M95128-DRMN8TP/K?
    - The operating voltage range for M95128-DRMN8TP/K is 1.8V to 5.5V.

  3. Can M95128-DRMN8TP/K be used in automotive applications?
    - Yes, M95128-DRMN8TP/K is suitable for automotive applications.

  4. What is the maximum clock frequency supported by M95128-DRMN8TP/K?
    - The maximum clock frequency supported by M95128-DRMN8TP/K is 10 MHz.

  5. Is M95128-DRMN8TP/K compatible with SPI interface?
    - Yes, M95128-DRMN8TP/K is compatible with SPI interface.

  6. Does M95128-DRMN8TP/K support software write protection?
    - Yes, M95128-DRMN8TP/K supports software write protection.

  7. What is the temperature range for operation of M95128-DRMN8TP/K?
    - The temperature range for operation of M95128-DRMN8TP/K is -40°C to 125°C.

  8. Can M95128-DRMN8TP/K be used in industrial control systems?
    - Yes, M95128-DRMN8TP/K is suitable for use in industrial control systems.

  9. Does M95128-DRMN8TP/K have a low power consumption mode?
    - Yes, M95128-DRMN8TP/K has a low power consumption mode.

  10. Is M95128-DRMN8TP/K RoHS compliant?
    - Yes, M95128-DRMN8TP/K is RoHS compliant.