SSI Technologies Inc
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
P51-300-G-J-P-4.5V-000-000
צפה בפרטים DataSheets

P51-300-G-J-P-4.5V-000-000

Introduction

The P51-300-G-J-P-4.5V-000-000 is a specialized product designed for a specific application. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Voltage Regulation
  • Characteristics: Precision, Low Power Consumption
  • Package: Surface Mount Device (SMD)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

The P51-300-G-J-P-4.5V-000-000 has the following specifications: - Input Voltage Range: 4.2V to 5.5V - Output Voltage: 4.5V - Output Current: 300mA - Dropout Voltage: 300mV at 100mA - Quiescent Current: 1µA - Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The P51-300-G-J-P-4.5V-000-000 has a standard SOT-23-5 pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)

Functional Features

  • Low Dropout Voltage
  • Low Quiescent Current
  • Thermal Shutdown Protection
  • Short-Circuit Protection
  • Enable/Shutdown Control

Advantages and Disadvantages

Advantages: - Precise Voltage Regulation - Low Power Consumption - Small Footprint - Wide Operating Temperature Range

Disadvantages: - Limited Output Current - Requires External Capacitors for Stability

Working Principles

The P51-300-G-J-P-4.5V-000-000 operates as a linear voltage regulator, maintaining a stable output voltage regardless of variations in the input voltage or load current. When enabled, it compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain the desired output.

Detailed Application Field Plans

The P51-300-G-J-P-4.5V-000-000 is suitable for various applications, including: - Battery-Powered Devices - Portable Electronics - IoT Devices - Wearable Technology - Sensor Modules

Detailed and Complete Alternative Models

Alternative models to the P51-300-G-J-P-4.5V-000-000 include: - P51-500-G-J-P-4.5V-000-000 - P51-300-G-J-P-3.3V-000-000 - P51-300-G-J-P-5.0V-000-000 - P51-300-G-J-P-ADJ-000-000

In conclusion, the P51-300-G-J-P-4.5V-000-000 is a precision voltage regulator with specific characteristics and applications. Its specifications, pin configuration, functional features, advantages, and disadvantages make it suitable for various electronic devices requiring stable voltage regulation.

[Word Count: 411]

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של P51-300-G-J-P-4.5V-000-000 בפתרונות טכניים

  1. What is the application of P51-300-G-J-P-4.5V-000-000?

    • The P51-300-G-J-P-4.5V-000-000 is commonly used as a pressure sensor in various technical solutions.

  2. What are the key features of P51-300-G-J-P-4.5V-000-000?

    • The key features include a 4.5V supply voltage, a pressure range of 0 to 300 psi, and a gauge configuration.

  3. How is P51-300-G-J-P-4.5V-000-000 typically integrated into technical solutions?

    • It is often integrated into systems that require accurate pressure measurement, such as industrial machinery, automotive applications, and HVAC systems.

  4. What are the environmental specifications for P51-300-G-J-P-4.5V-000-000?

    • The sensor is designed to operate within specific temperature and humidity ranges, making it suitable for a variety of environments.

  5. Can P51-300-G-J-P-4.5V-000-000 be used in hazardous environments?

    • Yes, it can be used in certain hazardous environments with appropriate certifications and enclosures.

  6. What output signals does P51-300-G-J-P-4.5V-000-000 provide?

    • It typically provides analog voltage or current output signals proportional to the measured pressure.

  7. Is calibration required for P51-300-G-J-P-4.5V-000-000?

    • Yes, periodic calibration is necessary to ensure accurate and reliable performance.

  8. What are the typical mounting options for P51-300-G-J-P-4.5V-000-000?

    • The sensor can be mounted using various methods, including threaded, flanged, or welded connections, depending on the application requirements.

  9. Are there any special considerations for wiring P51-300-G-J-P-4.5V-000-000?

    • Proper shielding and routing of the wiring are important to minimize electrical interference and ensure accurate readings.

  10. What maintenance is required for P51-300-G-J-P-4.5V-000-000?

    • Regular inspection, cleaning, and replacement of seals may be necessary to maintain the sensor's performance and longevity.