Sensata-Airpax
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
IUGN1-1-61-10.0
צפה בפרטים DataSheets

IUGN1-1-61-10.0

Product Overview

Category

The IUGN1-1-61-10.0 belongs to the category of integrated circuits.

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

  • Regulates input voltage to a specified level
  • Low dropout voltage
  • High output current capability
  • Thermal shutdown protection

Package

The IUGN1-1-61-10.0 is available in a small outline package (SOP) for surface mount applications.

Essence

The essence of this product lies in its ability to provide a stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels containing a specific quantity, usually 250 or 500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The IUGN1-1-61-10.0 has a standard 5-pin configuration: 1. Vin (Input Voltage) 2. GND (Ground) 3. Vout (Output Voltage) 4. NC (No Connection) 5. Enable (Shutdown or Enable Control)

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown
  • Enable control for power management

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • Thermal shutdown protection
  • Small form factor

Disadvantages

  • Limited maximum output current compared to some alternatives
  • Higher cost compared to basic linear regulators

Working Principles

The IUGN1-1-61-10.0 utilizes a feedback mechanism to compare the output voltage with a reference voltage, adjusting the internal circuitry to maintain a constant output voltage despite changes in input voltage and load conditions.

Detailed Application Field Plans

This voltage regulator is commonly used in portable electronic devices, battery-powered systems, and low voltage microcontroller applications where a stable power supply is essential for proper operation.

Detailed and Complete Alternative Models

Some alternative models to the IUGN1-1-61-10.0 include the LM317, LM1117, and LT1086. These models offer similar voltage regulation capabilities with varying specifications and package options.

Word count: 366

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של IUGN1-1-61-10.0 בפתרונות טכניים

Sure, here are 10 common questions and answers related to the application of IUGN1-1-61-10.0 in technical solutions:

  1. What is IUGN1-1-61-10.0?

    • IUGN1-1-61-10.0 is a technical specification that provides guidelines for the application of electrical components in specific technical solutions.

  2. How does IUGN1-1-61-10.0 impact technical solutions?

    • IUGN1-1-61-10.0 ensures that electrical components are applied in a standardized and safe manner within technical solutions, promoting reliability and compatibility.

  3. What types of technical solutions does IUGN1-1-61-10.0 apply to?

    • IUGN1-1-61-10.0 applies to a wide range of technical solutions, including electrical systems, control panels, and industrial machinery.

  4. Are there specific requirements for component selection outlined in IUGN1-1-61-10.0?

    • Yes, IUGN1-1-61-10.0 provides detailed requirements for selecting and applying electrical components based on factors such as voltage, current, and environmental conditions.

  5. Does IUGN1-1-61-10.0 address safety considerations in technical solutions?

    • Absolutely, IUGN1-1-61-10.0 includes safety guidelines to ensure that electrical components are installed and used in a manner that minimizes risks to personnel and equipment.

  6. How can I ensure compliance with IUGN1-1-61-10.0 in my technical solution?

    • Compliance with IUGN1-1-61-10.0 can be achieved by carefully following the guidelines and specifications outlined in the document during the design and implementation of technical solutions.

  7. Are there any specific testing or validation requirements associated with IUGN1-1-61-10.0?

    • Yes, IUGN1-1-61-10.0 may require testing and validation of electrical components and their application within technical solutions to ensure they meet the specified requirements.

  8. Can I use IUGN1-1-61-10.0 in international projects?

    • Yes, IUGN1-1-61-10.0 can be applied in international projects, as it provides standardized guidelines for the application of electrical components in technical solutions.

  9. Does IUGN1-1-61-10.0 address sustainability or environmental considerations?

    • While primarily focused on technical aspects, IUGN1-1-61-10.0 may include recommendations for sustainable and environmentally friendly practices in the application of electrical components.

  10. Where can I obtain a copy of IUGN1-1-61-10.0 for reference?

    • Copies of IUGN1-1-61-10.0 can typically be obtained from relevant industry organizations, standards bodies, or through authorized distributors of technical specifications.