IEG1-1-51-15.0-A-91-V

Product Overview

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

Input Voltage: 15.0V
Output Voltage: 9.1V
Package: TO-220
Essence: Voltage regulation
Packaging/Quantity: Typically packaged in reels or tubes, quantity varies based on manufacturer

Specifications

Input Voltage Range: 12V - 18V
Output Voltage: 9.1V ±5%
Maximum Output Current: 1A
Operating Temperature Range: -40°C to 125°C
Package Type: TO-220

Detailed Pin Configuration

Input Voltage (VIN)
Ground (GND)
Output Voltage (VOUT)

Functional Features

Overcurrent protection
Thermal shutdown
Short-circuit protection

Advantages and Disadvantages

Advantages

Stable output voltage
Built-in protection features
Wide operating temperature range

Disadvantages

Limited maximum output current
Requires heat sink for high power applications

Working Principles

The IEG1-1-51-15.0-A-91-V utilizes internal circuitry to regulate the output voltage by adjusting the resistance within the device based on the input voltage and load conditions.

Detailed Application Field Plans

This voltage regulator is commonly used in automotive electronics, industrial control systems, and battery-powered devices where a stable voltage supply is essential for proper operation.

Detailed and Complete Alternative Models

IEG1-1-51-12.0-A-91-V (Output Voltage: 12.0V)
IEG1-1-51-24.0-A-91-V (Output Voltage: 24.0V)
IEG1-1-51-5.0-A-91-V (Output Voltage: 5.0V)

This completes the entry for the IEG1-1-51-15.0-A-91-V, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של IEG1-1-51-15.0-A-91-V בפתרונות טכניים

What is IEG1-1-51-15.0-A-91-V?
- IEG1-1-51-15.0-A-91-V is a specific model of a component used in technical solutions, known for its reliability and performance.
What are the key features of IEG1-1-51-15.0-A-91-V?
- The key features include high durability, precise voltage regulation, compact design, and compatibility with various technical systems.
How does IEG1-1-51-15.0-A-91-V contribute to technical solutions?
- IEG1-1-51-15.0-A-91-V contributes by providing stable power supply, ensuring efficient operation of equipment, and enhancing overall system reliability.
What are the typical applications of IEG1-1-51-15.0-A-91-V in technical solutions?
- Typical applications include industrial automation, power distribution systems, renewable energy installations, and electronic control units.
What are the installation requirements for IEG1-1-51-15.0-A-91-V?
- The installation requires adherence to specified voltage and current ratings, proper grounding, and compliance with relevant safety standards.
How does IEG1-1-51-15.0-A-91-V compare to other similar components?
- IEG1-1-51-15.0-A-91-V stands out due to its robust construction, wide operating temperature range, and ability to handle varying load conditions.
What maintenance is required for IEG1-1-51-15.0-A-91-V in technical solutions?
- Regular inspection for signs of wear, cleaning of terminals, and monitoring of output parameters are recommended for optimal performance.
Can IEG1-1-51-15.0-A-91-V be integrated into existing technical systems?
- Yes, IEG1-1-51-15.0-A-91-V can be seamlessly integrated into existing systems with compatible input and output specifications.
What are the environmental considerations when using IEG1-1-51-15.0-A-91-V in technical solutions?
- IEG1-1-51-15.0-A-91-V is designed to operate in various environmental conditions, but protection from moisture, dust, and extreme temperatures is advisable.
Are there any safety precautions associated with the use of IEG1-1-51-15.0-A-91-V in technical solutions?
- Safety precautions include following proper handling procedures, avoiding overloading, and ensuring adequate ventilation during operation.