Rohm Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
BD8153EFV-E2
צפה בפרטים DataSheets

BD8153EFV-E2

Product Overview

Category

BD8153EFV-E2 belongs to the category of integrated circuits (ICs).

Use

It is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact package size
  • High efficiency

Package

BD8153EFV-E2 is available in a small form factor package, typically a 16-pin QFN (Quad Flat No-leads) package.

Essence

The essence of BD8153EFV-E2 lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

BD8153EFV-E2 is usually packaged in reels or trays, with a typical quantity of 2500 units per reel/tray.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 6.0V
  • Maximum Output Current: 3A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Control Method: PWM (Pulse Width Modulation)

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. SS: Soft-start pin
  7. PGND: Power ground pin
  8. VOUT: Output voltage pin
  9. BST: Bootstrap pin
  10. SW: Switching node pin
  11. AGND: Analog ground pin
  12. NC: Not connected
  13. NC: Not connected
  14. NC: Not connected
  15. NC: Not connected
  16. NC: Not connected

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency for reduced power consumption
  • Overcurrent protection for enhanced safety
  • Soft-start function to prevent inrush current
  • Adjustable output voltage for flexibility

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Compact package size
  • Wide input voltage range
  • Overcurrent protection

Disadvantages

  • Limited maximum output current (3A)
  • Requires external components for operation

Working Principles

BD8153EFV-E2 operates based on the principle of pulse width modulation (PWM). It regulates the output voltage by adjusting the duty cycle of the switching signal. This allows for efficient conversion of input voltage to the desired output voltage.

Detailed Application Field Plans

BD8153EFV-E2 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Laptops - Portable gaming consoles - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to BD8153EFV-E2 are: - BD8154EFV-E2 - BD8155EFV-E2 - BD8156EFV-E2 - BD8157EFV-E2

These models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, BD8153EFV-E2 is an integrated circuit used for voltage regulation and power management in electronic devices. Its compact size, wide input voltage range, and high efficiency make it suitable for various applications. However, it has a limited maximum output current and requires external components for operation. The detailed pin configuration, functional features, working principles, application field plans, and alternative models provide a comprehensive understanding of this product.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של BD8153EFV-E2 בפתרונות טכניים

Sure! Here are 10 common questions and answers related to the application of BD8153EFV-E2 in technical solutions:

  1. Q: What is BD8153EFV-E2? A: BD8153EFV-E2 is a specific model of voltage regulator IC (integrated circuit) designed for use in various technical solutions.

  2. Q: What are the key features of BD8153EFV-E2? A: Some key features of BD8153EFV-E2 include high efficiency, low power consumption, wide input voltage range, and built-in protection functions.

  3. Q: What is the typical application of BD8153EFV-E2? A: BD8153EFV-E2 is commonly used in applications such as power management for industrial equipment, consumer electronics, and automotive systems.

  4. Q: What is the input voltage range supported by BD8153EFV-E2? A: BD8153EFV-E2 supports an input voltage range of typically 4.5V to 40V.

  5. Q: What is the output voltage range of BD8153EFV-E2? A: The output voltage range of BD8153EFV-E2 can be adjusted from 0.8V to 36V.

  6. Q: Does BD8153EFV-E2 have any built-in protection functions? A: Yes, BD8153EFV-E2 has built-in protection functions such as overcurrent protection, thermal shutdown, and under-voltage lockout.

  7. Q: Can BD8153EFV-E2 operate in a wide temperature range? A: Yes, BD8153EFV-E2 is designed to operate in a wide temperature range, typically from -40°C to +105°C.

  8. Q: What is the efficiency of BD8153EFV-E2? A: BD8153EFV-E2 has a high efficiency rating, typically above 90%.

  9. Q: Is BD8153EFV-E2 suitable for automotive applications? A: Yes, BD8153EFV-E2 is suitable for automotive applications as it meets the necessary requirements and standards.

  10. Q: Are there any evaluation boards or reference designs available for BD8153EFV-E2? A: Yes, the manufacturer provides evaluation boards and reference designs to help users understand and implement BD8153EFV-E2 in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application notes provided by the manufacturer of BD8153EFV-E2.