ON Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
SBC848BLT1G
צפה בפרטים DataSheets

SBC848BLT1G

Product Overview

Category: Semiconductor
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy
Package: SOT-23
Essence: Regulating voltage with minimal power loss
Packaging/Quantity: Tape & Reel, 3000 units

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V to 5.0V
  • Dropout Voltage: 200mV at 1A
  • Accuracy: ±1%
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • High accuracy over line and load variations
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit

Advantages and Disadvantages

Advantages: - Wide input voltage range - Small package size - Low dropout voltage - Excellent line and load regulation

Disadvantages: - Limited output current capability - Sensitive to thermal conditions

Working Principles

The SBC848BLT1G is a low dropout voltage regulator that maintains a stable output voltage even when the input voltage is only slightly higher than the desired output voltage. It achieves this by using a PNP pass transistor to minimize the dropout voltage.

Detailed Application Field Plans

The SBC848BLT1G is suitable for various battery-powered applications, such as portable devices, IoT sensors, and handheld instruments. Its low dropout voltage and low quiescent current make it ideal for extending battery life in these applications.

Detailed and Complete Alternative Models

  1. SBC847BLT1G
  2. SBC849BLT1G
  3. SBC850BLT1G

This completes the entry for SBC848BLT1G, providing comprehensive information on its product details, specifications, features, and application field plans.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של SBC848BLT1G בפתרונות טכניים

  1. What is the SBC848BLT1G?

    • The SBC848BLT1G is a Schottky barrier diode designed for high-speed switching applications.

  2. What are the key features of the SBC848BLT1G?

    • The key features include low forward voltage drop, fast switching speed, and high current capability.

  3. What are the typical applications of the SBC848BLT1G?

    • Typical applications include power supply rectification, freewheeling diodes, and reverse polarity protection.

  4. What is the maximum forward voltage of the SBC848BLT1G?

    • The maximum forward voltage is typically around 0.5V at a forward current of 1A.

  5. What is the reverse recovery time of the SBC848BLT1G?

    • The reverse recovery time is typically in the range of nanoseconds, making it suitable for high-speed switching applications.

  6. What is the maximum forward current rating of the SBC848BLT1G?

    • The maximum forward current rating is typically around 8A.

  7. Is the SBC848BLT1G suitable for use in high-frequency applications?

    • Yes, the SBC848BLT1G is designed for high-speed switching and is suitable for high-frequency applications.

  8. Does the SBC848BLT1G have a small form factor?

    • Yes, the SBC848BLT1G is available in a small SOD-123 package, making it suitable for space-constrained applications.

  9. What are the temperature specifications for the SBC848BLT1G?

    • The SBC848BLT1G typically has a wide operating temperature range, making it suitable for various environmental conditions.

  10. Where can I find detailed technical specifications and application notes for the SBC848BLT1G?

    • Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.