ON Semiconductor
התמונה עשויה להיות ייצוג.
ראה מפרטים לפרטי מוצר.
NTZD3155CT1G
צפה בפרטים DataSheets

NTZD3155CT1G

Product Overview

  • Category: Transistor
  • Use: Amplification and switching of electronic signals
  • Characteristics: High gain, low noise, small package size
  • Package: SOT-223
  • Essence: NPN Bipolar Junction Transistor (BJT)
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Collector-Emitter Voltage (VCEO): 50V
  • Collector Current (IC): 500mA
  • Power Dissipation (Pd): 1.25W
  • Transition Frequency (ft): 250MHz
  • Noise Figure (NF): 3dB

Detailed Pin Configuration

The NTZD3155CT1G has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Advantages and Disadvantages

Advantages

  • Small package size
  • Low noise
  • High gain

Disadvantages

  • Limited power dissipation
  • Moderate transition frequency

Working Principles

The NTZD3155CT1G operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its terminals to amplify or switch electronic signals.

Detailed Application Field Plans

The NTZD3155CT1G is suitable for various applications including: - Audio amplifiers - Signal processing circuits - Switching circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to NTZD3155CT1G include: - BC547 - 2N2222 - 2N3904 - MPS2222A

This comprehensive entry provides an in-depth understanding of the NTZD3155CT1G, covering its basic information, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

רשום 10 שאלות ותשובות נפוצות הקשורות ליישום של NTZD3155CT1G בפתרונות טכניים

  1. What is NTZD3155CT1G?

    • NTZD3155CT1G is a dual N-channel 20 V MOSFET in a DFN2020-6 package, commonly used in various technical solutions.

  2. What are the key features of NTZD3155CT1G?

    • The key features include low on-resistance, high power dissipation, and a small form factor, making it suitable for compact designs.

  3. What are the typical applications of NTZD3155CT1G?

    • NTZD3155CT1G is commonly used in power management, battery protection, load switching, and motor control applications.

  4. What is the maximum voltage and current rating for NTZD3155CT1G?

    • The maximum voltage rating is 20V, and the maximum continuous drain current is typically around 3A.

  5. How does NTZD3155CT1G perform in high-frequency applications?

    • NTZD3155CT1G exhibits good performance in high-frequency applications due to its low parasitic capacitance and fast switching characteristics.

  6. What are the thermal considerations for NTZD3155CT1G?

    • Proper heat sinking and thermal management are important for maintaining optimal performance, especially in high-power applications.

  7. Can NTZD3155CT1G be used in automotive applications?

    • Yes, NTZD3155CT1G is suitable for automotive applications such as LED lighting, motor control, and power distribution.

  8. Are there any recommended layout guidelines for using NTZD3155CT1G?

    • Following recommended PCB layout guidelines, minimizing trace lengths, and providing adequate thermal relief are important for optimal performance.

  9. What are the common failure modes of NTZD3155CT1G?

    • Common failure modes include overcurrent conditions, excessive temperature, and voltage spikes, which can be mitigated through proper circuit protection measures.

  10. Where can I find detailed technical specifications and application notes for NTZD3155CT1G?

    • Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.